Post a pic of your latest purchase

Yup
 

Attachments

  • no-whammy.png
    no-whammy.png
    53.2 KB · Views: 1,088
New shorter brake line and new splitter that just came in the mail the other day.
This is the before and after of the front brake lines for my cb750
 

Attachments

  • IMG_1447.JPG
    IMG_1447.JPG
    1.7 MB · Views: 307
  • IMG_1448.JPG
    IMG_1448.JPG
    1.3 MB · Views: 294
;)

Jus kidding, I sold that AR having never shot it lol. I bought a gym haha gonna get my shit together!!
 

Attachments

  • G2.JPG
    G2.JPG
    30 KB · Views: 1,013
CALfeRacer said:
50d81d1f7f134a371c7064fe49b173b2.jpg

Picked this up today! Clutch plates are stuck (at least that's what I think) so I have to get her rolling and kick into 1st, but she runs good! Took her for a rip around the back yard and had a ton of fun. Started to tear into her after that to address the carb slide sticking open. Turned out to be some shoddy cable work that was making it stick.
bb7c9fa109b73b27f2cdcc636d4777a7.jpg
Click to expand...

Remove all that crap, pull sprocket cover and underneath you should find a 17mm nut with #4 Phillips screw.
The operating lever is tapered internally and the screw has an offset pin on inside end.
Loosen locknut and rotate screw to move operating arm up and down until pointer lines up with mark on crankcase
 
Boxes full of : tank surround, headlight and ears, brake master and braided SS lines, and new grips
 

Attachments

  • IMG_20160220_163847096.jpg
    IMG_20160220_163847096.jpg
    2.2 MB · Views: 312
  • IMG_20160220_164934346.jpg
    IMG_20160220_164934346.jpg
    2.6 MB · Views: 313
  • IMG_20160220_164939068.jpg
    IMG_20160220_164939068.jpg
    2.2 MB · Views: 305
decent small tach works off an internal rechargeable battery with a HT lead pick-up just one wire all done sweet
 

Attachments

  • IMAG0701.jpg
    IMAG0701.jpg
    1.1 MB · Views: 271
  • IMAG0702.jpg
    IMAG0702.jpg
    1.2 MB · Views: 297
  • IMAG0700.jpg
    IMAG0700.jpg
    1 MB · Views: 300
  • IMAG0699.jpg
    IMAG0699.jpg
    1.2 MB · Views: 290
  • IMAG0698.jpg
    IMAG0698.jpg
    1.1 MB · Views: 275
Have had zero luck trying to find a OEM seat for my bike so I found a good shape seat pan and will be rebuilding the seat. I could probably just buy a complete seat but with current exchange rates for us Canadians it will be cheaper to build.

$_57.JPG
 
Good ol' Harbor Freight comes thru AGAIN!

Got me a pipe bender-

412203810.jpg


...so I can reproduce these John Player Norton fairing brackets, not available anywhere on the planet 'till a JPN owner dies, and only then, if his estate is selling and not passing it down.

412203809.jpg


Unbelievably easy, although even after filling with sand, the first one came out "squashed"...

412203812.jpg


The next two came out nice and are at the powdercoater's now

412203822.jpg


One is for me, the other will pay for the pipe bender, all the materials, and put some gas money in my pocket.
 
For the H1 chop. Thanks for the hook up Tuna.
 

Attachments

  • ed7a4336afa25a5ddead8274f77fa8a2.jpg
    ed7a4336afa25a5ddead8274f77fa8a2.jpg
    251 KB · Views: 503
  • e4894df182f04ce31bdd9f2f940ed2a0.jpg
    e4894df182f04ce31bdd9f2f940ed2a0.jpg
    248.1 KB · Views: 519
Picked these items up on the weekend

8" 4 jaw chuck for the lathe but still need to machine an adapter plate
IMG_1033_zpse0xtdbim.jpg


4" milling vise (kurt type)
IMG_1032_zps4murylvb.jpg


And a clamping kit
IMG_1034_zpsacaeflig.jpg
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom