Special Thanks to Allie for selling me these awesome rearsets. Anyways, I finally had time to solve this puzzle. The installation was not straight forward, but it was not difficult either. The rearsets are indeed bolt on, but one of the bolts was not long enough(the brake side, top bolt). Thankfully I was able to find an appropriate bolt at Sears Hardware. After I bolted everything on, I found that there wasn't enough clearance for the linkage. The linkage was actually making contact with the brake arm. I remedied this by adding a few thick washers to the bolt that connects the footpeg. This gave me the clearance necessary to actuate the brake properly. The shifter side rearset was easy peasy. This setup works great. I put 100 miles on it in the last two days with no problems. These pics aren't the best. The sun was starting to go down and the lighting was bad. And the bike is dirty. But you get the picture.