SpottheDogg
Been Around the Block
Re: 1974 CB360 project- lots of pics and progress - - not many comments
Thanks, interesting. It is hard to see from that photo, did you use the factory position in the lower tree? I started to drill mine to tap it but have held off until I get a definite design.
dp9 said:heres how i did the steering stabilizer. mounted it on the right side with some aluminum angle iron, sprayed black. used two self tapping sheet metal screws with rubber/metal washers from lowes. on the tree, i just drilled a hole and put a nut on the bottom with some red loc-tite. I put the tank on, positioned it as close to the tank as possible, and then took the tank off and marked the position of the bracket (angle alum).
god, im a bad photog. im sure being drunk doesnt help. oh well. let me know if you want some sober shots of the setup.
Thanks, interesting. It is hard to see from that photo, did you use the factory position in the lower tree? I started to drill mine to tap it but have held off until I get a definite design.