verboten1
Der konig
I have an '86 ninja swingarm I am going to run on my 550, it is only slightly narrower than the stock part, so I will ned to make spacers (approx 5 mm each).
my question is, do I center the swingarm in the frame, and then use spacers on the axle to line the chain up, or do I center the wheel in the swingarm, and center it to the chain that way?
THANKS !!!
my question is, do I center the swingarm in the frame, and then use spacers on the axle to line the chain up, or do I center the wheel in the swingarm, and center it to the chain that way?
THANKS !!!