Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Just saw a red frame / white liveried bike .........................hmmmm, not sure.
I'm thinking of a pale [ almost pastel ] Yellow. Again - an old British car colour was Jonquil. Maybe with some white panels on the tank / stripes on mudguard / seat ??
And I DO have a litre left over from the Porsche California job !
I'm starting the prep work on the Tank and panels / seat over the Christmas break. I'll leave top coat until the weather warms up in the Spring - unless Mrs.B let's me have the spare infra red heater for my garage !
"Tangerine Dream" was one of several "in house" ident. names I picked - when the tins were going to be the new Ford [ UK ] Tangerine, with a Silver frame. Until I found out the cost of the Ford paint - "How Muckin Futch ".
One of the other names [ for Yellow finish ] was "Not so Mellow Yellow" [ see the back of the Speedster ] - however until a final decider, it was easier to keep with "Tangerine Dream" for the thread !
Many years ago I built a Le Mans 60's style Cafe Racer - that was ALL Red - "Simply Red".
I saw a very pale Yellow on a car yesterday - but couldn't get close enough through the traffic to see what make it was.
I just bought a job lot of rattle cans [ various colours ] for next to nothing. Hopefully that will give me the nod for the final colour choice.
I also found a guy on the Interweb who is selling "flake" for adding to nail varnish, decorating greetings cards etc. It looks very much like Metalflake to me ! He says it suspends OK in nail varnish, so I'll have a go with a small batch suspended in clear cellulose.
70 different colours available - and compared to genuine Flake for painting - silly cheap. Nothing to lose except a few quid's worth of materials.
Not to duplicate the story - but I've ended up with a 30' x 6'6" lean to / workshop space at the side of the house. Mrs.B thinks it's a log store ................. I'm thinking GBFO workbench, compressor, bench vice, LIGHT, HEAT, NO DRIPPING WATER ..heaven. I have to leave around 10' for logs - we only use the open fire Christmas / special occasions / for effect, so we don't need the sort of store we have in Saxony.
Will be finished mid way through Jan ................... then watch me go. ;D
I'm going to try to suspend it in clear lacquer and spray. I STILL have my flake gun from back in the 70's ! It's only a small "touch in" / detail gun, but plenty big enough for motorcycle work. The last flake jpob I did was a Vespa scooter for one of my customers.
As to the "sprinkle" method - I'm sure that would work as most of the samples the company sent me have been done in that way.
IF it works well with spraying [ can't see why not ] then I have hit upon an inexpensive source of flake !
That's 4 peeps that's had a go at removing the front wheel spindle now !!!! So it's not just me being a dummy.
I have had the offer of a complete front end from a B2 for £150 - but that's out of the funding window at the moment. The rear wheel bearings are now out [ courtesy of a pal ] - and the wheel bearings ARE as new [ as the PO told me ! ] and have come out unscathed.
I'll drop the front wheel off to my tame machine shop owner next week - worst case scenario - I'll get him to turn / cut the sleeve nut off and make me a new one.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.