Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
My wife has bought me a new crash helmet for Christmas. I have not owned a bike for 19 years so I assume that is the green light to order my Ace on Friday ;D
150 cc 606 kit fitted but have to work in morning so no test ride tonight
17 tooth front cog on instead of rear cog swap.
did not fit jets or plug as not needed
iridium plug and running 48 /98 jets
joeylimzy - the sockethead cap screws came from a local supplier of stainless steel hardware; they should be available from several places in your city such as:
I have paid my deposit for an Ace 125 today. The dealer is going to contact Skyteam about the derestricted chrome exhaust to see if he can order that at the same time as the bike. I hope it will be ready to go on March 1st. I decided to wait until the 14 reg plate comes out.
I used The Scooter Warehouse in Worthing. It is run by 2 brothers. I dealt with Rob and he was very helpful. He also done me a deal on delivery and its possible it may be here on Friday 28th Feb, so I can have a play with it before taking it out legally on March 1st.
I used The Scooter Warehouse in Worthing. It is run by 2 brothers. I dealt with Rob and he was very helpful. He also done me a deal on delivery and its possible it may be here on Friday 28th Feb, so I can have a play with it before taking it out legally on March 1st.
test rode big bore kit tonight... a must do modification. Went with 17 -38 gears used jets provided . used new ignition in rev limiter mode wound all the way out(20 turns). first ride around block was funny ...was set to top speed of 20kms an hour...proves it works as promised .
Wow...
do it...do it now!!!!
it no longer sounds like it is working so hard...no longer rides the same as it did..was good bike ...now better bike.
Hope you all had a good Christmas and got lots of Ace presents! I've had a chance to ride mine a fair bit during the hols and I love it. I see the Big bore kit is a popular mod and all I can say about mine is that within the parameters of running in mine goes great - It is hard not to thrash it!
One of the trips I took was to see a mate of mine who has a couple of the Honda dreams that our bike are based on - see picture - All I can say is that the Ace does not come out of a comparison disgraced!
I am well into these little bike and I am hatching a plan to fit a 250 motor in one. I've written to Skyteam and asked about a complete 250 Raptor motor and am awaiting the reply. Has any one in Oz tried this? I see that you can buy a OHC motor from these guys
but apart from complete bikes these engine don't seem to be available in the uk - unless Skyteam will flog me one - Failing a new Chinese engine a s/h Honda will have to be found....
Anyroad up - have a great New Years eve if I don't post before then
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.