I've now done 300km and have:
removed egr thingy.
done a 150km valve gap check- was around .08mm, adjusted to be 0.05mm.
hacksaw the exhaust, drilled and pulled out the main honeycomb cat - i see there was also the same honycomb thing inside the muffler - I didn't remove this. rewelded the pipe back on.
drilled a 12mm hole in the end of the exhaust baffle (drill down the centre of the exhaust) someone said 15mm but I didn't have one handy.
ordered:
new bigger jets
race cdi 6 pin thingy
new 34 cog for speeeeeed
next couple of months -my new list:
1.new tyres (front is still out of round)
2.front fork spacers 15-17mm i think
3.stainless header and exhaust(local custom build)
4.clipons
5.remove rear mudguard & tidy up rear brake lights
6.rev counter
Sent from my XT925 using Tapatalk