stroker crazy
crazy as a fox
vonmighty said:Might need a walkthrough though... :/
Easy peasy! (almost)
I used some 10mm bolts I had on hand, but the critical thing is having about 19mm measurement (but less than 20mm) across the diagonal on the head.
Remove top triple clamp and undo fork cap plugs. These can be really tight due to a small amount of rust.
Put nut-and-bolts assemblies on top of fork springs, and replace fork plugs. This is the hard part, as it's difficult to force the springs down and turn the plugs at the same time. Do whatever you have to do (including copious swearing) to get them back into place, but don't neglect to use some type of anti-seize on the threads.
Crazy