tz inspired cl350

joelvaughan56

Active Member
Still not managed to get my tank and seat painted .i have mostly been focusing on the wiring and getting all the brakes and cables sorted and fitted some new coils and a cheap tytronic electronic ignition had to cut back on spending a bit due to job uncertainty from the coronavirus but at least it’s given me some time on my hands to get work done around the house which should now give me some decent time to get the bike sorted
 

Attachments

  • 3800D0D0-D14E-4109-BDE3-DFE69F824BBB.jpeg
    3800D0D0-D14E-4109-BDE3-DFE69F824BBB.jpeg
    1.4 MB · Views: 93

joelvaughan56

Active Member
Just had my mate paint my tank seat and headlight bowl in lambo rosso marz red and the classic wing logo under the laquer
 

joelvaughan56

Active Member
Excuse the mess in my garage but has anybody gone 2-1 on the cl pipes ? I was going to go with the hi for 2-1 but I picked up a set of cl 2-1 pipes without the back boxes for a great price I’m thinking of a 2-1 ss y peice and a cone engineering 12” muffler what you guys think? I also just received a pair of vm30 Mikunis if speedy Moto co it’s getting close to the first start up now
 

Attachments

  • 5F9A1C1D-5ED8-4527-A8A7-B0262CFDC75A.jpeg
    5F9A1C1D-5ED8-4527-A8A7-B0262CFDC75A.jpeg
    2.6 MB · Views: 78

ridesolo

“Kto ne riskuet, ne pyot champanskoye.”
DTT SUPPORTER
DTT BOTM WINNER
I've got CL pipes on my 360/378. At the moment they're going into a pair of Emgo Shorties w/ modified baffles, but If I could find the correct collector I'd consider changing the thing to a 2-1 system. Admittedly I haven't looked very hard, but I'll bet there are lots of options on eBay. Might be easier to find a >- rather than a =- though.
 

joelvaughan56

Active Member
came across this on ebay. its quite a reasonable price so im going to order it maybe if i alter the exhaust bracket a little maybe and weld a cone engineering silencer to it i could make it work
1594499419361.png
 

joelvaughan56

Active Member
Got round to mocking up the exhaust today with the cl pipes and a 2-1 and I really like the look. I will weld the silencer to the 2-1 then use clamps to mound it to the cl pipes I think I’m going to do the cl pipes in vht grey flameproof as they’re not as nice up close as in the photos
65392B19-8A37-413D-908B-75D02C2B69CB.jpeg
F3606EFA-298F-4504-A33E-AF4DF3AE59EC.jpeg
 

ridesolo

“Kto ne riskuet, ne pyot champanskoye.”
DTT SUPPORTER
DTT BOTM WINNER
Yup, that's the way to do it. Looks great.
 

teazer

Over 1,000 Posts
DTT BOTM WINNER
Springs look Waaaay better than clamps and are not hard to do. One way is to get a length of suitable wire and bend it into a loop to weld on, or pull a chain side plate and weld that on. It's not as elegant, but cheap....
 

MrMister

Been Around the Block
DTT BOTM WINNER
Looks great. Check out my CL360 build. I put a 2 into 1 on as well.


Sent from my iPhone using DO THE TON
 

joelvaughan56

Active Member

DTT Bike Of The Month Gallery

DTT Light or Dark

www.jadusmotorcycleparts.com
shop.themotoworks.com
www.cognitomoto.com
https://www.townmoto.com
www.speedmotoco.com
www.lostapostle.ca/
www.sparckmoto.com
Top Bottom