StryfeS13
Active Member
Alright so I'm running a VM36 on my GN400 and the damn is running super super rich. Like black smoke coming out of the tailpipe, smelling terrible, super hard to start, etc.
When I took out the jets it had a 50 pilot and a 360 main - which is ridiculous. I dialed it down to a 27.5 pilot and 220 main, and it is still running rich. I have a 2.0 slide, 6F15 needle w/ clip on the top position, mixture screw is 2 turns out.
The inside of the carburetor is wet with fuel, the slide is wet with fuel, and the intake is wet with fuel. What the hell is going on?
I'm about to just put the stock CV carb back on lol
When I took out the jets it had a 50 pilot and a 360 main - which is ridiculous. I dialed it down to a 27.5 pilot and 220 main, and it is still running rich. I have a 2.0 slide, 6F15 needle w/ clip on the top position, mixture screw is 2 turns out.
The inside of the carburetor is wet with fuel, the slide is wet with fuel, and the intake is wet with fuel. What the hell is going on?
I'm about to just put the stock CV carb back on lol