CB125s build. "The Dishwasher"

Re: CB125s build. questions abound!

honeybadger said:
great to know! if I run into any problems with mine (it's always seeming to need more than 4-5k rpm anyways) charging, I'll definitely switch stators!


Riding this thing, I am loving it more and more.





Got my new seat in today! going to drop it off at the upholstry shop tomorrow with instrucitons on how to modify/recover it. Should have a sick new flat cafe seat in a week or so!
Ooh, what seat did you order? I have my eye on one from glass from the past.
 
Re: CB125s build. questions abound!

DirtyFrank said:
Ooh, what seat did you order? I have my eye on one from glass from the past.


A stock seat that was really mangled with a clean, straight pan. I'm going for a flat cafe seat, as I want to run two up, still.




Turns out it's going to be quite expensive ($170) but the end result should kick ass. Sent it to a place that specialized in bike seats.
 
Re: CB125s build. questions abound!

Cool. Let me know how just changing the rectifier works out or if the cb350 stator is required.

Where did you send you pan out to?
 
Re: CB125s build. questions abound!

got myself a bench grinder with buffer wheel and some white rouge... This is going to be bad for my spare time




dsc0175l.jpg




oldspice said:
Cool. Let me know how just changing the rectifier works out or if the cb350 stator is required.

Where did you send you pan out to?


Rich's custom seats. Seriously focused bike seat place. They have a suite that people who travel there can stay in while they get an individual custom seat done. Probably more than I needed to spend for what I wanted, but oh well. This thing's total investment is at like $1200.
 
Re: CB125s build. questions abound!

600 grit. Whole part is going to be up to 1000 grit and then buffed.


dsc0186y.jpg



Before on my exhaust


dsc0180cy.jpg



dsc0181v.jpg



final


dsc0182g.jpg
 
Re: CB125s build. questions abound!

Just 0000 steel wool, soapy water, and some elbow grease. It was actually in pretty good shape.
 
thanks, it came out great in person, too!


I got my LED brake light in, but unlike the normal bulbs, it won't light up at all under 6v power. so it looks like I'll have to dive into this 12v conversion sooner than expected. I think I'll ride it as-is with the new seat for a couple weeks first, and then dive into the fork rebuild, new wheel, and electrical changeover.




I did have a crazy, crazy idea though. What do you guys think of a wooden cafe solo seat? I'm pretty handy with carpentry and carving, and I was thinking a custom walnut "hump" seat would really set this thing apart from the rest.




Also, whereabouts would you suggest I get a header to start working with for the exhaust? I don't want to spend $100 on a pipe that I'm only going to use the first three inches off of.
 
just cruise the buy/sell section of all the sites similar (though not as good) to this one.
like sohc4
or the honda singles club
or thumpertalk
or vintage japanese cycles.


shouldn't take to long to find someone willing to lead a good header go for cheap, maybe the muffler is rusted out to shit or they bent it, who knows.


also while you are there set up a WTB or wanted to buy for the tube, you'll have emails in no time.
 
honeybadger said:
That is very, very basic. I can do lamination (like a surfboard)


This is an example closer of the wood styles I can do


wooden-vespa_1.jpg
Oh hell yes. Get the ball rolling on that. While you're at it, make two of whatever you come up with and I'll buy one.
 
DirtyFrank said:
Oh hell yes. Get the ball rolling on that. While you're at it, make two of whatever you come up with and I'll buy one.


Depending on how the carvings come out with an old pine stump I'm going to start with, I may just make some extras ;)


In the meantime, my new cafe'd dual seat will be done thursday ;D
 
I keep saying this, but you're tackling all the things on my to do list. I guess I'll just sit back and watch to see what happens and learn from your mistakes before I start modding mine much. I like where you're going, just share more pictures!
 
DirtyFrank said:
I keep saying this, but you're tackling all the things on my to do list. I guess I'll just sit back and watch to see what happens and learn from your mistakes before I start modding mine much. I like where you're going, just share more pictures!


Expect pics thursday, when it'll have the new seat on!
 
I scored 8 feet of ironwood and 8 feet of douglas fir for my first attempt. Already have them segmented into 1x4x2ft planks, sanded, and prepped for lamination. 8 inches wide is just BARELY enough for the tail of this bike, haha. I'll post some pics of them when they're laminated.


mmmmm. Laminating. I can start shaping it tomorrow.




dsc0204c.jpg
 
Back
Top Bottom