Father Son 75 CB200T Rise From the Ruins

Sonreir said:
Yeah... but then you can stroke it out and/or fill in some space on the head?
Matt,
I love this story! It reminds me of your ingenuity! http://sports.groups.yahoo.com/group/CB175RaceTech/message/556

I think it was an Atc 90 piston! I want my son to gladly oblige an engine tear down challenge some day!
 
Johnny B had a wicked fast CB but the rules have changed since that time and AHRMA now allow Hondas to be 200cc. Mike Riddle sells (or used to sell) a 56 or 57mm piston but I don't recall if it was small pin (175) or big pin (200).

Welding the head isn't hard but the seats have to be removed first. Our 250 motor has a welded up bathtub/hemi hybrid head shape.
 
teazer said:
Johnny B had a wicked fast CB but the rules have changed since that time and AHRMA now allow Hondas to be 200cc. Mike Riddle sells (or used to sell) a 56 or 57mm piston but I don't recall if it was small pin (175) or big pin (200).

Welding the head isn't hard but the seats have to be removed first. Our 250 motor has a welded up bathtub/hemi hybrid head shape.
Teazer you sent us on a journey yesterday by using the word "compare". I love that word! I found out there is an eighth "woe" missing from the NIV Bible by comparing. It probably explains why TV evangelists like the NIV. ;) In doing so it took 4 hours to discover that we could once again do more with less. But before we found the site that had all the Honda piston information and dimensions, we learned that you told a guy on the 305 site, "you can take it or leave it" after he challenged your credibility. LOL Well we have believed in you from the beginning. As you know we take it and run with it!

Zeke reads this forum when I am not around. I have told him you can sit in the council of fools and their folly or you can sit in the council of the wise. DTT has provided great wisdom. In phase one of Rise from the Ruins we learned how to walk. Phase 2 we learned how to play hide and seek. Sonreir provided the impetus of the raindrop, Kop put us in touch with Dutch at Airtech and now we have our Peel 1 fairing and the Tz Aero tail being made!

We have named Lucky's tail after you. "The Teazer Tail" or maybe it should be the Tale of Teazer.

Phase 3 is going to be Redeemed Racing Engine. We want to redeem things that others have given up on like our 16 buck head is going to get new chambers with some squish! We were wondering how far the cb200 jug can be bored out???? Or will we need to fit new cb77 sleeves in. We would like and try the cb77 pistons. How do you like the MC high comp cb77's and we know how you feel about kenig pistons. The Kenig might not be a bad choice for a couple high speed runs...Called Bore-tech and they told me that the CB77 pistons had the wrong wrist pin size for the cb200... He was wrong. I found this out because you said to Compare.

Btw we live in a city that was once called possum trot Texas. Our mascot is the Hawk. Doesn't it seem fitting that Lucky should be sporting some Superhawk components? :)
 
Very Zen. You teach philosophy perhaps - very open minded compared to most of my Texan friends :-)

I can't remember whether I used cut down CB77 liners or CB750 liners. It used to be easy to buy sets of barrels with broken fins for pennies on the dollar and that's a cheap source of liners. When it comes to boring out the jug, the limit is way bigger than one might imagine. On a couple of sets of CB72 barrels you can see the liner in places where it's bored out so far and that was never an issue.

CB200 liner is relatively thick with 64.5mm OD according to my records, so you could bore that to fit a 60mm piston. I found the note that says I used CB77 liners in the 240cc CB175. CB77 are nominally 67.0mm OD where CB750 are 69.5. Or get some cast aluminum sleeves made and have them plated by Millennium in WI and get new JE pistons with 1.2mm Iron rings if they are available in the correct size. That starts to get a little expensive though.

Have a look at other designs of cam chain tensioner and guide to stabilize that long skinny chain. CBR600 is a good place to start looking.
 
I tell my close minded religious friends that God chose to speak to his prophet through his ass and continues to do so! Just call me Jack :) I am a real briar in the cotton patch :)


Thank you! We are looking at another cb200 jug that needs some tlc.

"We are philosophers! Are we philosophers? We are quite definitely here as representatives of the Amalgamated Union of Philosophers, Sages, Luminaries, and other professional thinking persons." HHGTTG

Socrates was looking for the logos the meaning behind the meaning, Plato had his head up in the arse of the theoretical, Aristotle had his in the particulars...those guys needed motorcycles to work on ;)
 
Re: Re: Father Son 75 CB200T Rise From the Ruins

Texasstar said:
"We are philosophers! Are we philosophers? We are quite definitely here as representatives of the Amalgamated Union of Philosophers, Sages, Luminaries, and other professional thinking persons." HHGTTG

Socrates was looking for the logos the meaning behind the meaning, Plato had his head up in the arse of the theoretical, Aristotle had his in the particulars...those guys needed motorcycles to work on ;)

i knew i liked this guy
 
Re: Re: Father Son 75 CB200T Rise From the Ruins

Rich Ard said:
i knew i liked this guy
before you like me too much I also tell my atheist friends that they are the evidence that there is a God....Especially a female atheist who knows how to wrench on her BSA Rockett 3 and talks like Kate Winslet...sorry I digressed into one of my male fantasies...;)
 
I want y'all to know that when I told Zeke that our copper head gasket came in from Lani
at http://www.coppergaskets.us/ContactPage.html Zeke started doing the cabbage patch dance and singing, "compression, compression, compression!"

I just needed to share that proud pappa moment!
 
Texasstar said:
lol...i am just looking for more squish for Luctor Et Emergo! Aren't we all really looking for more squish?

No squish makes for an unfilled life and combustion chamber.

Too much squish leads to trouble breathing.

Just the right amount of squish makes for a happy Goldilocks and a happy motor. :-)
 
teazer said:
No squish makes for an unfilled life and combustion chamber.

Too much squish leads to trouble breathing.

Just the right amount of squish makes for a happy Goldilocks and a happy motor. :-)
words of wisdom lol
 
Pulling Lucky's engine! We have been practicing porting with our other head and our dremel! It works great because we have the wand like the dentist. We are going to do it with off the shelf bits. Don't worry we have done our home work and we will wear goggles and and a mask. We plan on just porting the exhaust ports. Then installing our new copper gasket...Zeke is wrenching and I am drinking beer...I love supervising ;)
 

Attachments

  • image.jpg
    image.jpg
    264.4 KB · Views: 291
  • image.jpg
    image.jpg
    164.4 KB · Views: 278
  • image.jpg
    image.jpg
    218.3 KB · Views: 290
Sonreir said:
Go get some Devcon F, too. :D
oh that was easier the second time ;) thanks Sonreir. The preview of AG Bells book was a HUGE help to feed our addiction... We bought another jug today :)
 

Attachments

  • image.jpg
    image.jpg
    236.4 KB · Views: 286
Thanks to acm177. He posted it on our page and until I saved it to my camera roll to realized what it was!!!!!! I blew it up for clarity. PISTON dimensions for a cb200, cb160, cb175 both vertical and sloper. Wanted to pit this up for the bots to find it.
 

Attachments

  • image.jpg
    image.jpg
    75.4 KB · Views: 292
  • image.jpg
    image.jpg
    74.1 KB · Views: 287
  • image.jpg
    image.jpg
    148.3 KB · Views: 288
We wanted to give Lani a big shout out at Coppergaskets.us

We were blown off by a competitor of Lani's and called him because we saw Sonreirs post. We sent Lani an email on Wednesday and the following week we had our gasket. Thanks Lani you are on our wall of the Toybox turned into tool bench!
 

Attachments

  • image.jpg
    image.jpg
    273 KB · Views: 268
Texasstar said:
Thanks to acm177. He posted it on our page and until I saved it to my camera roll to realized what it was!!!!!! I blew it up for clarity. PISTON dimensions for a cb200, cb160, cb175 both vertical and sloper. Wanted to pit this up for the bots to find it.

Just fyi, this was generated from a pdf on Eurospares and converted to cad. Upon converting I verified by measuring a set of cb200 pistons, and v175 pistons to check for scaling accuracy. So I added the cb200 piston to the diagram.
 
Well it looks like we found out why we are running rich...at least on the right side
 

Attachments

  • image.jpg
    image.jpg
    201.9 KB · Views: 285
  • image.jpg
    image.jpg
    155.2 KB · Views: 279
Back
Top Bottom