Father Son 75 CB200T Rise From the Ruins

And if Teazer will tell us how to install an extra clutch plate and if we can find where we put our new clutch springs...the 175 has a 1.000 5th gear
 
1.000 5th gear will lower top speed when compared to the .96.

If the ton is your goal, I'd skip that swap.
 
Not much difference between 175's and the 200...
First is slightly different @ 2.769 vs 2.796
Second and third are identical @ 1.882 and 1.450 respectively.....
Fourth is ALMOST identical @ 1.173 vs 1.174

The better gearing ratios would be to steal 1st from a 175 and keep 2-5 from lucky
 
simo said:
Not much difference between 175's and the 200...
First is slightly different @ 2.769 vs 2.796
Second and third are identical @ 1.882 and 1.450 respectively.....
Fourth is ALMOST identical @ 1.173 vs 1.174

The better gearing ratios would be to steal 1st from a 175 and keep 2-5 from lucky
zeke will need that 1st gear Simo...I beat him off the start 3 times with his 17/35 gearing.
 
We are ready for Barber and we pulled the star off my belt buckle for a little finishing touches for our cb200 cafe racer transformation. Thanks you to all! Mom learned how to ride this weekend!!!
 

Attachments

  • image.jpg
    image.jpg
    263.4 KB · Views: 314
  • image.jpg
    image.jpg
    321.8 KB · Views: 326
  • image.jpg
    image.jpg
    203.8 KB · Views: 318
Tim said:
Wish I was going to be there to meet you guys in person - have a great weekend!
looking forward to it someday Tim...maybe Zeke and I can ride up to Canada one day...
 
The 200's don't have an dished 'B 'plate like the 175's
It's that push vs pull clutch difference between the 175/200
Part 17 in this pic of a cb175 clutch
The three wise men will have better ideas .....
But To fit a cb175 push clutch and an extra plate into lucky you'd also need to swap primary transmission shaft and clutch and both engine side covers and deal to the primary gear/clutch gears not meshing
Looking forward to the pictures from your trip
Have fun, ride safe
 

Attachments

  • image.jpg
    image.jpg
    505.4 KB · Views: 324
simo said:
The 200's don't have an dished 'B 'plate like the 175's
It's that push vs pull clutch difference between the 175/200
Part 17 in this pic of a cb175 clutch
The three wise men will have better ideas .....
But To fit a cb175 push clutch and an extra plate into lucky you'd also need to swap primary transmission shaft and clutch and both engine side covers and deal to the primary gear/clutch gears not meshing
Looking forward to the pictures from your trip
Have fun, ride safe
thank Simo we plan on making it to your neck of the woods one day!
 
Always welcome Tex
Head to Australia if you like going in straight lines for 1000's of miles
NZ if you like to turn a corner on a corner
 
You'll have to get a tig at home so he can practice
Looks like a great weekend was had by all judging from the photos etc
 
simo said:
You'll have to get a tig at home so he can practice
Looks like a great weekend was had by all judging from the photos etc
it was magic...Allen who was in charge of the Ace Cafe area saw Zeke helping park the bikes in rows. He made a phone call that got him a personal tour of Mr. Barbers inner sanctums and private garages. He was the curator for Mr. Barbers Lotus Collection. They talked shop about Metal Rescue and he told Zeke about his opportunities and where he went to school to get a vintage car restoration degree. He introduced Zeke to Bryan Fuller and we came back Sunday morning to Brian's Seminar for Museum members. Most were over 60 and then there was one Ten year old. Brian told Zeke how he found his way and "stalked" Chip Foose to get a job. We spent most of the weekend finding ways to make Lucky faster. We spent a lot of time looking at the Morbidbellis. Zeke got to meet Mr. Barber.

However he was more excited that Junior Burrell road lucky and surprised him walking down the paddock with a big smile. He was more impressed with "his buds" at Kylie's garage.
 
Back
Top Bottom