Texasstar
Can't is a four letter dirty word
Thanks to DTT we are learning about a 2 stroke motor today. That and it is Rockers vs Mods on my sons Birthday weekend. It took him less than an hour to strip it down.
thanks!Luugo86 said:Looks good bro
it is a honda rune headlight...kinda retro but progressive liked the line and flow with the rear...and kept it all in the honda family. We think it makes her look like she is winking as she passes on byLuugo86 said:Its coming together nicely man. I like the exhaust. Where did you get that headlight bucket? And what made you decide on it, just curious.
Teazer the Gl1000 dynatek is in the mail. Dynatek said to use the dc7-1 5ohm single coil dual output for a street engine. Any mods necessary for the cb200?teazer said:It's a DYNA on a custom backing plate and a modified rotor and shortened crank nose. OK for a race bike with total loss ignition, not so good on the street. Riddell does a magneto conversion for the 160-175-200 motors that's worth investigating for a race bike. For teh street the easiest solution is a GL1000 Dyna mounted in place of the points.
thank you.teazer said:5 ohm is correct for the street.
You will remove one of the modules and put it aside as a spare. If you keep the stock mechanical advance, remove the cam and replace it with the rotor. I think you will have to shorten the rotor to get it all aligned.
It's a very easy fit and works with stock coil as well but has a fatter spark with a Dyna coil. Ventilate the "points cover" to get some air in there and you should be golden.