Father Son 75 CB200T Rise From the Ruins

Sonreir said:
How is it that the CB175 puts out more power? The CB175 has a higher redline and three more ponies?

I can't seem to find the info at the moment, but I recall that the 160s and 175s had a more aggressive cam...

I finally found the 175 cam specs I don't have the 160 specs...but will look

KO
Intake opens 10 degrees
closes 40
Exhaust open 40
closes 10
Your cb175ko has an Overlap of 20.00 degrees and has in Intake Duration of 230.00 degrees. The Exhaust Duration is 230.00 degrees. Your Lobe Separation Angle is 105.00 degrees. The Inlet Cam has an Installed Centerline of 105.00 degrees ATDC. The exhaust cam has an Installed Centerline of 105.00 degrees BTDC.



K3/K4
Intake opens 10 degrees
closes 30
Exhaust open 40
closes 10

Your cb175k3 has an Overlap of 20.00 degrees and has in Intake Duration of 220.00 degrees. The Exhaust Duration is 230.00 degrees. Your Lobe Separation Angle is 102.50 degrees. The Inlet Cam has an Installed Centerline of 100.00 degrees ATDC. The exhaust cam has an Installed Centerline of 105.00 degrees BTDC.


CB200
Intake opens 5 degrees
closes 35
Exhaust open 40
closes 5

Your cb200 has an Overlap of 10.00 degrees and has in Intake Duration of 220.00 degrees. The Exhaust Duration is 225.00 degrees. Your Lobe Separation Angle is 106.25 degrees. The Inlet Cam has an Installed Centerline of 105.00 degrees ATDC. The exhaust cam has an Installed Centerline of 107.50 degrees BTDC.
 
Not only can he weld better than me but his first soldering was amazing. So we got our wires soldered and shrink wrapped and road Lucky 25 miles to show her to our local DTT family.
 

Attachments

  • image.jpg
    image.jpg
    1.2 MB · Views: 335
  • image.jpg
    image.jpg
    1.1 MB · Views: 336
You have the lift numbers on those cams?

Just for reference, here's the numbers of the milder of the two cams offered by Megacycle:

.270" lift
Intake - Duration 256°, 28° BTC, 48° ABC
Exhaust - Duration 256°, 53° BBC, 23° ATC

Designed to run with stock pistons and springs.
 
Sonreir said:
You have the lift numbers on those cams?

Just for reference, here's the numbers of the milder of the two cams offered by Megacycle:

.270" lift
Intake - Duration 256°, 28° BTC, 48° ABC
Exhaust - Duration 256°, 53° BBC, 23° ATC

Designed to run with stock pistons and springs.
This is why I double post! So Zeke won't have to go hunt for this info later.
Teazer said in another post, "160 cam has less lift than 175/200. CB160 is 3.7/3.4mm and 175/200 are 3.9/3.7 more or less."


Now I don't know if those numbers are net cam lift or gross? Regardless the megacycle cam is .270 inches 6.85 mm. We are thinking about doing the full race cam and pistons if we re gonna go for LSR. If we have two motors we can go wide open throttle for thE BUB run in Bonneville. Zeke needs to be 12 so we have two years. Then to run the Texas Mile he needs to be 16. We know nil about using different fuels. So this ought to be fun...

lucky ran 75 at 8000 rpm all night with me on her back and we are rockin the 40 year old points. May be getting some point float and Kop said to add another spring. Still breaking her in...We have our dynatek gl1000 ei in the box. So we will do that after we finish breaking her in so we can get a good baseline. She has just over a 100 miles on her. Want to put a steering stabilizer on her before we let Zeke loose (he is limited to 40mph around the neighborhood) We need to true up the rear wheel, add new bearings, and work on all the little things.

She has:
Vintage advantage racing springs
Viton seals
New standard lapped stock valves
Stock gaskets
Racing timing chain
Stock carbs with no mods we left the 8 in...
No porting
Open Cl exhaust
100 jets
New racing chain
.75 over pistons


So as you can see we have a lot of fun things we can do! I want Zeke to do them little by little so he keeps tearing down this motor for repetition sake. If he can make this one go fast then he can do anything. There are NO bike Racing vintage gurus that we have met in Texas like there are the Northwest and Ohio etc. So maybe Zeke can be one with y'alls wisdom and experience.

Next up is cometic copper gaskets, the ei, and the megacycle street cam for this motor, and some carbs off a 175. That should get us the 3hp and a 1000 rpms more.
 
If you're going to swap out the carbs, keep an eye out for a pair of Mikuni TM24s. The flat slide 24s would be a good match for your engine and goals.
 
Texasstar said:
Not only can her weld better than me but his first soldering was amazing. So we got our wires soldered and shrink wrapped and road Lucky 25 miles to show her to our local DTT family.
Thats sweet,hate i couldn't make it to the meetup. Things are crazy here in the shop right now!!!
 
The CR93 fairing is the right size for the 175 twins. The 250 fairings are a might big and the Peel fairing is omigod big on a 175, but great streamlining. I was looking at building a Peel fairing for my 125 Honda twin (a bit smaller than your 175 but not hugely so) and was going to narrow and shorten the fairing, but I wrapped the mould around the little twin and figured by the time I got all the chopping and cutting and bonding back together, would probably have to build a new mould.
If you're looking at ultimate top speed, remember what happens to the air when its past the rider is also important - the seat you have looks to be too small / too low for good closure behind the rider and you might want to consider something else - there was a pretty long thread on this awhile back.
One last note, regarding the comment about one of the fairings you had photos of, didn't take a windscreen; some of the fairings have an external "ledge" so the screen fits on the outside while a lot of fairings mount the screen inside the fiberglass - so no ledge.
Regards,
Pat Cowan,
Pacomotorstuff
 
Junior Burrell said:
Thats sweet,hate i couldn't make it to the meetup. Things are crazy here in the shop right now!!!
zeke has been begging me to take him to Juniors shop! I can tell it is busy for you by all the instagram pictures you are tagged in! Zeke said he would come turn wrenches for you for free :)
 
pacomotorstuff said:
The CR93 fairing is the right size for the 175 twins. The 250 fairings are a might big and the Peel fairing is omigod big on a 175, but great streamlining. I was looking at building a Peel fairing for my 125 Honda twin (a bit smaller than your 175 but not hugely so) and was going to narrow and shorten the fairing, but I wrapped the mould around the little twin and figured by the time I got all the chopping and cutting and bonding back together, would probably have to build a new mould.
If you're looking at ultimate top speed, remember what happens to the air when its past the rider is also important - the seat you have looks to be too small / too low for good closure behind the rider and you might want to consider something else - there was a pretty long thread on this awhile back.
One last note, regarding the comment about one of the fairings you had photos of, didn't take a windscreen; some of the fairings have an external "ledge" so the screen fits on the outside while a lot of fairings mount the screen inside the fiberglass - so no ledge.
Regards,
Pat Cowan,
Pacomotorstuff
Thanks Pat!
That is exactly what Kent said at Airtech. He said we need to look at a taller vesco tail so the air could stay on longer. They said they would cut down the Peel to fit for us. Now for learning more about how and why which is more important than just buying the fastest fairing. We appreciate everyone's wisdom! Kop has us blowing smoke on a softball while looking at P51 fighter wings and comparing them to rain drops. Kop told us the velocity feet per second of a rain drop and then off the top of his head said but you will be going this fast...lol. We are green but green means go so we are trying to absorb it all. Zeke told me he could rebuild a carb from memory last night so all this is paying off in big dividends!

Just to clarify Zeke is not smoking a pipe :)
 
Hi fellas! Dutch at Airtech here. Might as well chime in since I've become part of this thread in a way....

First off: Pat & Zeke, congrats on a great father & son project. Look forward to Phase II.

Pat (@Paco), the Peel fairing that we have finished tooling for a few months ago is not the large 'Mountain Mile' version as used on a Manx, ours was narrowed and shortened by Fibercraft's 'Greasy Dick' Kilgore way back when to fit onto small bikes - Frank Scurria rode his Duc 250 single to a championship in '61 using this fairing. We've now restored the fairing and made a mold. It will work well on Pat's 200 or your 125 for that matter. Though small for a Peel, it is not a small fairing compared to many others, but as you point out you can use a larger fairing on a small bike as long as it has a good aerodynamic shape.

FWIW the VFS1 shown earlier in the thread takes a windscreen just like the other fairings (as Pat pointed out) and works just fine on an air cooled bike - the fork and cooling opening are left blank and should be trimmed to suit the application. We have a few more land speed fairings that come blank like that.
 
dutchz said:
Hi fellas! Dutch at Airtech here. Might as well chime in since I've become part of this thread in a way....

First off: Pat & Zeke, congrats on a great father & son project. Look forward to Phase II.

Pat (@Paco), the Peel fairing that we have finished tooling for a few months ago is not the large 'Mountain Mile' version as used on a Manx, ours was narrowed and shortened by Fibercraft's 'Greasy Dick' Kilgore way back when to fit onto small bikes - Frank Scurria rode his Duc 250 single to a championship in '61 using this fairing. We've now restored the fairing and made a mold. It will work well on Pat's 200 or your 125 for that matter. Though small for a Peel, it is not a small fairing compared to many others, but as you point out you can use a larger fairing on a small bike as long as it has a good aerodynamic shape.

FWIW the VFS1 shown earlier in the thread takes a windscreen just like the other fairings (as Pat pointed out) and works just fine on an air cooled bike - the fork and cooling opening are left blank and should be trimmed to suit the application. We have a few more land speed fairings that come blank like that.
Thanks Dutch!!! We are looking forward to working with you! Not only did we find out we are from the province of zeeland but Lucky is named because of our family crest of zeelander/ de zeeuw- Luctor Et Emergo "I struggle I emerge" ! Her colors are the sun emerging out of the sea! Her velocity stacks are blue sucking in the struggle and emerging out the orange Taylor wires to set the cylinders on fire! That peel fairing will be painted appropriately! And a guy named Dutch is gonna help get us there! Also fitting...I am almost a Calvinist because of this build!
 
kopcicle said:
~almost ?

~kop
My wife said nobody would get my Calvinist remark. But I told her she was wrong because not only did they know how to go fast they were also well read.

Now as a child I had Calvin crammed down my throat during weekly catechism. So I rebelled. Then after being spanked by God I returned and went to theological seminary which I found to be theo illogical cemetery and graduated with a degree on how to extort money from widows and orphans...so I rebelled. I was chastened by my grandmother for not marrying a good Dutch gal. Instead I met a gal that told me I needed to relax and drink a beer with her. So I married her a Methodist, Cherokee, Apache, fun loving gal. Who didn't have the weight of the world on her shoulders. Now I don't know if that was predestined or not...but I wouldn't trade her for anything :)
Almost yea...
 
Texasstar said:
zeke has been begging me to take him to Juniors shop! I can tell it is busy for you by all the instagram pictures you are tagged in! Zeke said he would come turn wrenches for you for free :)
I would love for you and Zeke to come visit the shop,I'll pm you my # and just let me know when ya'll want to stop by. Although I'm crazy busy I don't mind taking a lil time for you 2.
 
http://youtu.be/6_ljghIDDxc the purple marks lined up was our previous timing. We played with advancing and retarding to the right and left of our marks. We were never able to redline in 5th gear until we advanced the timing as below.

"There are some tried-and-true methods for increasing the combustion speed of your mixture, however. One common way is ignition advance. By lighting the mixture sooner, you can actually begin building pressure while the piston is still accelerating toward TDC. By the time it reaches TDC, you also have a ton (literally) of PSI built up and so it pushes the piston back down with greater force." - Sonreir's How to Build a Functional Cafe Racer

Yep it worked!
 

Attachments

  • image.jpg
    image.jpg
    1.2 MB · Views: 330
Last night we gained so much the clutch started slipping. With the timing slightly advanced and the clutch adjusted we posted our best top speed of 77mph. We know that the speedo in 1975 didn't provide an accurate reading but please tell that to the guys at the Ace cafe in the 50's and 60's. So is doing the ton the relative ton of the 60's? :);). Our speedometer is a benchmark and nothing more. My wife clocked me at 72 when our speedo said 75. So the odyssey has a 3.4% margin for error for being over and 1% for being under...after the fixed it and settled a law suit.

We checked our plugs after last night and they were still bronze we will check them tomorrow and see if we need to move up to 102.5 jets. We are running 93 octane.

After about 10 minutes of trying to go fast it turned into a beautiful ride for the sunflowers are in full bloom in Texas.
 

Attachments

  • image.jpg
    image.jpg
    648 KB · Views: 308
Texasstar said:
We checked our plugs after last night and they were still bronze we will check them tomorrow and see if we need to move up to 102.5 jets. We are running 93 octane.

High octane fuel burns slower than regular. You can probably get the same power but dropping a degree or two of advance and using 87.
 
Sonreir said:
High octane fuel burns slower than regular. You can probably get the same power but dropping a degree or two of advance and using 87.
thanks Sonreir... We will give it a go on the next tank. Junior Burrell told us to the same thing. We are gonna put our Dyna S on next. Can you degree the backing plate of the dyna S with a decal for static timing?

We are playing to learn. What are some other fuel combinations we can safely try? Non ethanol etc...?
 
Non-eth goes without saying. We have E10 here in Oregon and swapping to non-eth nets you an extra 3% or so.

If you can find spark plugs with multiple side electrodes, give them a try, too. Those extra electrodes take up a little volume in the combustion chamber and may get you a couple of extra tenths of compression.

All that kinda stuff is simple and easy, but your real gains will be from the fairing and building the engine.
 
Also... don't mess around with the timing too much until you get some dyno time. You don't want to blow your engine. Definitely keep it less than 40° of full advance.
 
Back
Top Bottom