Redliner said:If they lapped your valves: did you keep track of which valve goes into which seat?
If you're going to lap them: do you know how to mark the seats with marking blue/Sharpie to ensure an even and solid contact area?
Sonreir said:You don't lap valves after a Serdi cut.
Sonreir said:You don't lap valves after a Serdi cut.
Roc City Cafe said:never used a serdi, but I like to marker up the valve and seat and "lap" it with a really fine compound to ensure a proper seating area
they showed us a couple of drag bike motors in the shop for repairs and we couldn't resist checking them out. Guides had moved...seats were destroyed...I can only imagine what the valves looked like. The one above ran on Nitro methane with nitrous???? The ports were HUGE! A big yes on the wear and tear. We are cutting our guides for it is time consuming with steel guides. Then David said to drop it by the shop for reaming the guides.Sonreir said:I assume that would reduce the life of some of the components?
we lapped our valves the first time but from this point on we will serdi cut. You just have to see it to believe it. Teazer has been telling us over and over to Serdi cut. After reading Vizard and Bell and how they preach about the valve and seat being an obstruction to flow...every little cut matters. I could never cut a 32 degree back cut nor could I radius on a valve by hand let alone the seat. There are 3 angles on the intake seat and the exhaust seat transitions into the bowl and Venturi of the seat is beautiful.Roc City Cafe said:never used a serdi, but I like to marker up the valve and seat and "lap" it with a really fine compound to ensure a proper seating area
www.wellsracing.comRedliner said:Texasstar, who did you find in D/FW that can cut seats for something that small? What'd it cost ya?
Texasstar said:.................... Teazer has been telling us over and over to Serdi cut....................
you and Kop also told us to score some parts bikes...now we have our cb200 cams to send off for different grinds and we scored two full bikes (one in pieces) with new gasket set, clubmans, carb kits, Etc... Great tanks, one bike will clean up like new, and Zeke will be starting his own eBay parts store here shortly if MOM has her way.teazer said:That's only because I don't remember that I already said it. Oldtimers i think is the name for it or CRS
That and the fact that there is no better way to get a precision valve job. Hand cutters and grinding stones are OK if there's no other choice, but Serdi is the filet of valve jobs and it's hard to go back to lesser cuts. .... ;-)
No Simo these are very Lucky for they just helped a young man named Scott go to back to college after he told the man to "take this job and shove it"...we picked them up in Buda, Texas. One was sitting in the rain on a trailer. Buda has an interesting story of a gal who robbed a bank back in the twenties, she was a student at the University of Texas and secretly married to a young man. The jury in Buda couldn't convict a woman because they didn't want to see her hang...so she walked free. Now why would a woman rob a bank unless she needed the money or she was married to a law student who new she wouldn't hang...sounds very familiar to Les Miserables and Jean Valjean's story or a story about a snake in the grass. Any way there is Great grace in Buda, Texas.simo said:So these ones a little less 'lucky'?
Also scratch my idea of the using a 175 head the variance in 175/200 crown height is taken up by the cylinders so no comp bump
dont thank me...thank Sonreir, Teazer, Kop and company...I am just a cow chewing the cud and sometimes the right answer comes out.simo said:I stand corrected
didn't know there were 'get out of jail free' cards in real life...
You were right about my carbs by the way she idles like a trooper at 1100 and starts first kick
Very happy Man
Great read b the way