First Cafe project (CB450)

Oh and I got some goodies in today. And mocked up the rear suspension.
 

Attachments

  • 1.JPG
    1.JPG
    132.6 KB · Views: 300
  • photo.JPG
    photo.JPG
    119 KB · Views: 278
Oh yeah, that's my favorite part of anything, when you're anxiously waiting for parts, haha.

They're the Avon AM26. I wanted to be different, but I heard so many good things about these tires that I just had to go with them. ;D

Also in the bunch are a pair of Progressive shocks, EBC brake shoes, and Renthal Kevlar grips. I have those grips on my R6 and I love them, so I wanted to get them for the CB as well.
 
The Avons seem to be the tyre of choice for cafe's at the moment, they have a nice, modern, grippy looking tread pattern and profile. I think I might have to do the same!
 
Yup pretty much. I heard they're pretty good on the road as well, and it's not just looks. Can't wait to ride on them!
 
They are the Avon AM26 tires, 100/90-19 front and 110/90-18 rear. They can be purchased at almost any motorcycle store. I got them from denniskirk.com.
 
how did i miss these updates!
awesome work so far, ive got the same tyres and there great!
powder looks really good!
what are your plans with the engine?
does it need boring?
good luck with the rest of the build!
Mark.
 
Thank you Mark!

Yes the engine does need boring, so I will be doing 4th over. It also needs some new valves. I haven't split the bottom case so I'm not sure how the crank looks, but it should be in good shape. Hopefully that's all I have to do to it.
 
I finally decided to crack the case open tonight. I will be hating myself come assembly time, but I wanted to do it for the peace of mind.
 

Attachments

  • photo-155.jpg
    photo-155.jpg
    167.3 KB · Views: 273
  • photo-154.jpg
    photo-154.jpg
    223.3 KB · Views: 272
And I have a couple of questions with that:

What's the easiest way to remove the shift forks, and what disaster should I look for while doing so?

What's the easiest way to remove the shifter rod, and what should I be looking for?

What's the best way/product to clean the sludge from the inside of the case?

How can I remove the head studs/bolts?

Thanks.
 
Oh and I almost forgot, I picked up my Woodcraft clip ons today too. They make the frame look so good! Lol
 

Attachments

  • 2.jpg
    2.jpg
    46.8 KB · Views: 278
  • 1.jpg
    1.jpg
    37.6 KB · Views: 264
When you figure out the answers to the lower end r&r process, make sure you post up details - I'll be digging into my XS lower end this winter.
 
Wheels and tires are all done. Trued and balanced. Also received my bronze swing arm bushings, oil seal kit, and SS engine bolt kit.

I also received a sprocket but even though sold for this bike, it's not for this bike. Not happy about that.
 

Attachments

  • 1.png
    1.png
    463 KB · Views: 316
.
 

Attachments

  • image-3264449096[2].png
    image-3264449096[2].png
    471.8 KB · Views: 292
  • image-743049654[1].png
    image-743049654[1].png
    391.9 KB · Views: 257
Doc you may want to check the bronze bushings for fit, mine were just a little small so I knurled the outer surface so they had to be tapped in with a wooden block. Oh and I drilled and fitted the swing arm with a grease nipple as I removed the one from the swingarm bolt for more clearance for my rearset and the pivot for the rear drum brake setup.
 
Will do. I haven't gotten a chance to yet, I just received them this morning and then I had to leave for work.
What did you use to knurl it? Some type of tool? Just incase I need to do mine.
What did you cover the hole on the SA bolt with after you removed the nipple? Also, can I just purchase grease nipples from stores? That's sounds like a good idea, even if I don't need clearance.
 
Back
Top Bottom