Honda CB-1 Concept

[Rick4004]

I was searching for some parts for another project and came across a Kawasaki steering damper that I bought way back in the 80's. I know I had it but hadn't seen it in years. I used the stock mounting point on the GSXR lower clamp, machined off the kawasaki body mount and made a new floating bracket. The frame mounting bracket is just a piece of angle right now but I will incorporate the damper mount and the fairing mount later on.

 

[Rick4004]

I wanted to check bar to tank clearance before I started building the tank in aluminum. I put together this mock-up from 1/4" mdf. You can see how much volume I am going to lose to house the throttle bodies and plenum.