KZ550- Iron Geek K Zeta

Hey guys,

Been waiting on parts and doing a bunch of little stuff. My partner in this build has a connection who's going to weld our tank shut so we can do a custom petcock as well as custom make our Rear Sets!!!! Awesome!

ANyways, did a little brushed metal for brake control and caliper(no photo yet)
 
photos
 

Attachments

  • brus_brake1.jpg
    brus_brake1.jpg
    79.5 KB · Views: 709
  • brus_brake2.jpg
    brus_brake2.jpg
    82.9 KB · Views: 688
Wutup dudes,

So the motorcycle has been a bit neglected lately but do not fear. Here's a photo of some cleaned up wiring and on Tuesday we will get cracking on it again
 

Attachments

  • clean_wiring.jpg
    clean_wiring.jpg
    100 KB · Views: 693
So we had a productive day at the Iron Geek Garage........

The rear shocks got stripped (springs blasted) and shot with clear coat
The headlight got an iconic stripe
the gas tank got a custom petcock-------big thanks to Nerdsports (check out his CM400 under specials)
plenty of wiring goodness to come
 

Attachments

  • weld_petcock.jpg
    weld_petcock.jpg
    89.8 KB · Views: 651
  • shock_mounted.jpg
    shock_mounted.jpg
    65.6 KB · Views: 633
  • new_shocks.jpg
    new_shocks.jpg
    118.8 KB · Views: 644
  • headlight_stripe.jpg
    headlight_stripe.jpg
    88.2 KB · Views: 632
Did a little bit today. Just haven't had that much time to work on the bike..... anyways. Here's a few photos

Neutral light, and a little bit of swag for the headlight bucket
 

Attachments

  • neut_light.jpg
    neut_light.jpg
    63.8 KB · Views: 673
  • headlight_swag.jpg
    headlight_swag.jpg
    65.9 KB · Views: 678
Yeah. Speedo got moved to where the tach sat and we wanted to Know when the bike was in neutral (obviously) so that was the most convenient place to put the bulb
 
Re: KZ550- Iron Geek K Zeta (She Runs!)

ok duders.....
the bike runs, but first you have to endure some pictures showing some cleaned up wiring and other random stuff. Oh and we finally figured out the after market turn-key ignition
 

Attachments

  • carb_stax.jpg
    carb_stax.jpg
    80.9 KB · Views: 533
  • igniion_switch.jpg
    igniion_switch.jpg
    68.9 KB · Views: 568
  • clean_wiring_mas.jpg
    clean_wiring_mas.jpg
    88.2 KB · Views: 679
  • clean_wiring.jpg
    clean_wiring.jpg
    90.5 KB · Views: 557
Re: KZ550- Iron Geek K Zeta (It Runs!!!!!)

did a quick setup with the cables
 

Attachments

  • gangly_cables.jpg
    gangly_cables.jpg
    95.5 KB · Views: 606
and boom

<iframe src="https://www.facebook.com/video/embed?video_id=10151843795502571" width="320" height="240" frameborder="0"></iframe>
 
Re: KZ550- Iron Geek K Zeta (It Runs!!!!!)

Saturday will be the next day to work on it. The goal is to do these things then:

Valve lap
check points
get it running on all 4 cylinders (currently running on 3)
Finish exhaust (wrapped and straight pipes welded on)
mount my homie's sweet fabbed up tail light
install after-market throttle
 

Attachments

  • tail_light_antes.jpg
    tail_light_antes.jpg
    55.5 KB · Views: 617
Great Love the KZ550's. I just picked up a 81 KZ550 ltd. Im not sure how I am going to go foward with her yet. Your post has a lot of great Ideas.


Thanks,...
 
My wiring harness looks the same but my sharpie writing looks like "trail bites"...guess I should have taken omore time and wrote clearer. I'm on board and it's looking good!!
 
County Fair said:
Great Love the KZ550's. I just picked up a 81 KZ550 ltd. Im not sure how I am going to go foward with her yet. Your post has a lot of great Ideas.


Thanks,...

goochwarmer said:
My wiring harness looks the same but my sharpie writing looks like "trail bites"...guess I should have taken omore time and wrote clearer. I'm on board and it's looking good!!

Thanks guys..... if you got any questions or have any hangups feel free to ask away
 
Hey Guys so yesterday we had a good day at the Iron Geek Garage. I got some photos that can tell the story better than I.
 

Attachments

  • chain.jpg
    chain.jpg
    74.6 KB · Views: 603
  • full_bike_1.jpg
    full_bike_1.jpg
    47 KB · Views: 369
  • full_bike_2.jpg
    full_bike_2.jpg
    44.8 KB · Views: 381
  • first_ride.jpg
    first_ride.jpg
    82.8 KB · Views: 681
It has been awesome to work wis this guy. Big thanks to Mario Algaze. Without his ingenuity this project would have never come out the way it has. This was my first build, so he offered to show me the ropes and teach me how to build a motorcycle as well as paint it and in general make it look awesome.... So guys, work on motorcycles with your friends.
 

Attachments

  • brake_work.jpg
    brake_work.jpg
    105.9 KB · Views: 652
So,

From here we need to get the front brake properly mounted. Definitely need to get into the carbs and check out the valves, because this bike does not run well. After that the list is as follows:

paint tail
upholster seat
tail light
sand, polish, and clear the tank
rear sets?
properly mount ignition
............... you never really do finish do you
 
Back
Top Bottom