New Jersey sr500 tracker/scrambler

[Maritime]

on a thumper like the SR I would keep the rubber.

 

[DohcBikes]

Solid risers give more control. It's a preference thing.

 

[redwillissuperman]

I say one of each. Control plus comfort.

 

[DohcBikes]

^lol

There are lots of different materials you could tune the feel with.

 

[irk miller]

Solid mount and put a bar snake in your handlebars... or buckshot... or sand.

 

[Maritime]

Solid mount and put a bar snake in your handlebars... or buckshot... or sand.

Forgot about this, this may be the best solution.

 

[Nj732port]

so im planning on making these inserts out of aluminum plate my self.

my plan is to use a 2" hole saw to cut out 4 blanks then use a 1.25" hole saw (if they make it) to cut most of the way through the blanks then cut around the outside to create a lip

then clean em up and put them on

 

[Tune-A-Fish]

If you are using the blanks, remember to measure the ID of the hole saw and yeah they make off sizes and Lowes carries a decent supply

 

[DohcBikes]

so im planning on making these inserts out of aluminum plate my self.

my plan is to use a 2" hole saw to cut out 4 blanks then use a 1.25" hole saw (if they make it) to cut most of the way through the blanks then cut around the outside to create a lip

then clean em up and put them on

Look at this guy, regular fabricator now

 

[Nj732port]

If you are using the blanks, remember to measure the ID of the hole saw and yeah they make off sizes and Lowes carries a decent supply

good thing you wrote the ID thing I would of not checked that part out at all! thanks! ;D

 

[Nj732port]

Look at this guy, regular fabricator now

ehh every once in a while I put the typewriter away and the latte down, soon you'll be asking me how to do this stuff ;D ;D ;D

 

[redwillissuperman]

Next thing you know he is going to be dating Sandra Bullock and cheating with Kat Von D

 

[Nj732port]

Cleaning sucks waiting on parts to come in too

Headlight doesn't fit not sure why thought it was the connection but I don't think that's what it is anymore, the tabs don't touch the sides of the bulb when tightened

 

[DohcBikes]

Got a few ocd habits do we... not even going to comment further so don't ask.

Anyhow, looks like maybe you have been drinking get to work jesse james

 

[Nj732port]

Got a few ocd habits do we... not even going to comment further so don't ask.

Anyhow, looks like maybe you have been drinking get to work jesse james

ocd?! whatttttttttttttt

 

[xb33bsa]

you really kinda want the slugs to be a precision part ie concentric so the bars are straight to the wheel
a hole saw is not going to get you a good enough part in the end
if you knew somebody with a lathe then some plugs to mimick the rubbers made out of black delrin would be a good way to go
to bad there isn't a way to make the rubber hard.....plenty of ways espoused on the internet how to soften up rubber but other than time how do you make it harden up ?

 

[Nj732port]

you really kinda want the slugs to be a precision part ie concentric so the bars are straight to the wheel
a hole saw is not going to get you a good enough part in the end
if you knew somebody with a lathe then some plugs to mimick the rubbers made out of black delrin would be a good way to go
to bad there isn't a way to make the rubber hard.....plenty of ways espoused on the internet how to soften up rubber but other than time how do you make it harden up ?

Once I get back to workin on this I'll post up what I fabricate they sell pre made ones I just don't want to spend 80$

 

[Nj732port]

I haven't given up don't worry guys! Just dealin with some shit right now...and vomit...and piss....

 

[DohcBikes]

Show me a bad dog, and I'll show you a bad owner. Must be some human trainin' needs done.

 

[Maritime]

Oh know, is Lulu sick again? Hope she feels better. Sasha says hi.