New Jersey sr500 tracker/scrambler

Started assembling front end can't get the lower bearing to press on chipped my paint a little bit so I stopped looking back I should of put the lower and stem in the freezer for a night :( now the bearing is kinda wedged on
 

Attachments

  • image.jpeg
    image.jpeg
    903.5 KB · Views: 306
DohcBikes said:
Hey nj how do you like my new avatar
Click to expand...

If you state that you don't give a fuck then that's the same as giving a fuck so change it cause it's lame put a badass unicorn giving the middle hoof or something
 
Paint, maybe that's the issue? Have any tips on getting the bearing off with out screwing up the new seal? It's wedged on a little bit already or should I just get it pressed on?
 
Nj732port said:
Paint, maybe that's the issue? Have any tips on getting the bearing off with out screwing up the new seal? It's wedged on a little bit already or should I just get it pressed on?
Click to expand...
It's already half on, if it's just paint press it on. Paints not gonna do shit to it. The reason it's not going on loosely is because it's not supposed to, and it's worse because you don't have it straight. Using a press with a jig will pop it right on.
Nj732port said:
If you state that you don't give a fuck then that's the same as giving a fuck
Click to expand...
oh ma gish I never woulda thot that withowt your'e heelp Mj derp

Nj732port said:
so change it cause it's lame put a badass unicorn giving the middle hoof or something
Click to expand...
I'll leave you the same one i left the WildeMan

173550c0d014843f5d3f506e8cf28934.jpg
 
DohcBikes said:
It's already half on, if it's just paint press it on. Paints not gonna do shit to it. The reason it's not going on loosely is because it's not supposed to, and it's worse because you don't have it straight. Using a press with a jig will pop it right on. oh ma gish I never woulda thot that withowt your'e heelp Mj derp
I'll leave you the same one i left the WildeMan

173550c0d014843f5d3f506e8cf28934.jpg
Click to expand...

Every time you post a unicorn you bring back memories.

www.youtube.com/watch?v=JPONTneuaF4
 
Tune-A-Fish said:
Pics suck... Android??... wtf did you paint the stem for and wtf did you not scuff it off foo ???
Click to expand...

There was some paint on it when I took it off so I didn't think anything of it :( hopefully I can get the seal and bearing off without damaging them and I can strip that area of the paint
 
Nj732port said:
There was some paint on it when I took it off so I didn't think anything of it :( hopefully I can get the seal and bearing off without damaging them and I can strip that area of the paint
Click to expand...
Don't worry about it just press the fuckin thing on
 
If you could take a photo with something other than a potato it would help, but it still looks like there's a spacer or something under the old seal that you haven't removed from the stem.
 
Nj732port said:
There was some paint on it when I took it off so I didn't think anything of it :( hopefully I can get the seal and bearing off without damaging them and I can strip that area of the paint
Click to expand...

Just press it on it's fine, just would be done by now if you would of dressed the race with a little emery 100, least it will be a snug fit :o
 
hillsy said:
If you could take a photo with something other than a potato it would help, but it still looks like there's a spacer or something under the old seal that you haven't removed from the stem.
Click to expand...

damn you an XB my photos are in the category of warhol 8)
 
Nj732port said:
theres always next time! ;)
Click to expand...

Fuckin right... I know my mistakes are neck and neck with getting it right the first time... usually the mishaps are when I rush shit these days and I know it when im doing it.
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light

    • Spread the Love

    Back
    Top Bottom