"Patina" The 1973 CB175 Cafe Racer

teazer said:
And let us not forget that a fatter bluer spark is a sure sign of more spark energy and that means it also uses more battery or generator energy, so make sure that the battery is well charged and stays that way.
For sure. Got my new r/r should be good to go
 
Mike, this the kit you got?

http://www.ebay.com/itm/Dyna-Ignition-5-ohm-Dual-Output-Coil-DC7-1-Wires-DW-200-Harley-Davidson-/400547857830?pt=Motorcycles_Parts_Accessories&hash=item5d428345a6&vxp=mtr

It's the only one with wires on ebay. What are the end caps they have on the wires in that pic?


Sent from my iPad using Tapatalk
 
Ah, ok. Couple more questions about that: my EI came with specific resistor caps to use. Are the caps that come on this this the pus-on type? And how are the 90 degree caps usually attached? Threaded somehow? Sorry, never done it :/


Sent from my iPad using Tapatalk
 
We are running non resistor caps because we are running iridium plugs. I would want 90 degree end caps.


Sent from my iPad using Tapatalk
 
The 90 degree caps have a brass screw that you screw the cap into the wire to make contact with the wire core. Let me take some pictures for you.


Sent from my iPad using Tapatalk
 
Texasstar said:
We are running non resistor caps because we are running iridium plugs. I would want 90 degree end caps.


Sent from my iPad using Tapatalk

Ok. So the straight caps in the ebay kit are non-resistor? I guess my question is are those straight ones replaceable with the ones I have from my EI?


Sent from my iPad using Tapatalk
 
u3ynede9.jpg
numy4y9e.jpg
these are on our other cb200 they are resistor caps and screw into the wire


Sent from my iPhone using Tapatalk
 
1sttimer said:
Ok. So the straight caps in the ebay kit are non-resistor? I guess my question is are those straight ones replaceable with the ones I have from my EI?


Sent from my iPad using Tapatalk
Stock cap replacement is NGk LB05FP 8030 black 90's
Yes that one off eBay
 
cafe mike said:
Stock cap replacement is NGk LB05FP 8030 black 90's
Yes that one off eBay
Side note: check the wire before you do anything. Mine came with small slices in them. That was ok because you need to cut and crimp on one end while the other is screw on
 
Haven't checked the continuity throughout the coil. I'm headed to pick up the bike from the shop this week so I can do all this myself but until then, I'm just speculating. I'm going to check continuity in both spots before I go buy anything.


Sent from my iPad using Tapatalk
 
cafe mike said:
Side note: check the wire before you do anything. Mine came with small slices in them. That was ok because you need to cut and crimp on one end while the other is screw on

Which ones were screw on, the kit on ebay? Sorry I got lost in your comment which you were referring to :)


Sent from my iPad using Tapatalk
 
1sttimer said:
Which ones were screw on, the kit on ebay? Sorry I got lost in your comment which you were referring to :)


Sent from my iPad using Tapatalk
The end caps ( one that clips onto spark plug are screw on. The other end of wire (check your wires for damage) gets a crimp connector and slides in like an old coil on a car.
 
cafe mike said:
The end caps ( one that clips onto spark plug are screw on. The other end of wire (check your wires for damage) gets a crimp connector and slides in like an old coil on a car.

Ohhhhh got it. Is that why the crimp connectors are included? I was thinking that was in case you had bullet connectors for the wires on the side if the unit instead if ring terminal connectors. I gotcha.

So for the connections on the side, you have ring terminals from your harness? The stock one used bullet connectors.


Sent from my iPad using Tapatalk
 
1sttimer said:
Ohhhhh got it. Is that why the crimp connectors are included? I was thinking that was in case you had bullet connectors for the wires on the side if the unit instead if ring terminal connectors. I gotcha.

So for the connections on the side, you have ring terminals from your harness? The stock one used bullet connectors.
You still can use your bullet connectors. I just cut off the wires that are on old coil


Sent from my iPad using Tapatalk
Just a matter of cutting off the old leads and putting ring terminals on. Doesn't matter what's positive or neg even though it comes with a diag
 
Back
Top Bottom