Texasstar said:Take you voltage ohmmeter and stick the positive in the copper core on one side in the negative and see what kind of continuity you have Without the ends
Sent from my iPhone using Tapatalk
Texasstar said:What you said before you were not getting any continuity with the Caps on is that Correct
Sent from my iPhone using Tapatalk
Texasstar said:Do you have your old plug wires and caps
Sent from my iPhone using Tapatalk
Texasstar said:Are you testing the continuity by putting one lead into one plug cap and the other lead into the other plug cap
Sent from my iPhone using Tapatalk
Texasstar said:With both wires connected to the coil
Sent from my iPhone using Tapatalk
Texasstar said:Okay strip back 1 inch so that your copper is exposed folded over shove it in to the coil and check it without the caps
Sent from my iPhone using Tapatalk
Texasstar said:Also our caps line up with the and of the silicone wire going into the coil
Sent from my iPhone using Tapatalk
Texasstar said:No leave the resistor caps screwed in the wire removed the metal ends that go into the coil The exposed end of the copper into the coil
Sent from my iPhone using Tapatalk
Texasstar said:Ok with the resistor Screwed in and the exposed copper on the other end test the continuity
Sent from my iPhone using Tapatalk