"Patina" The 1973 CB175 Cafe Racer

Re: "Patina" The 1973 CB175 Cafe Racer

Ok guys. I'm ready to learn :)

Teach me where I should start with this thing
 
1st thing make sure you can pretty easily poke into a wire with it(thru the colored plastic on a wire)
you may need to sharpen it with a file,oilstone grinder or rock(in your case proly a rock :) )
then tset it across bat terminals
then you can hook it to + side of batt and check grounds
then hook to known good ground or batt- and you can use it to check/chase power flow to AND through switches and check for power at terminals such as on the coil
 
Re: "Patina" The 1973 CB175 Cafe Racer

After you check your light at your battery you can attach the alligator clip to any part of the bike that is grounded (ie bolts on the frame etc.) then you follow the bouncing electrons... find the wire that goes to the switch from the battery and with the alligator clip on a ground insert the sharpened point through the wire casing to come in contact with the copper wire...and let us know if you have power before the switch then try after the switch with the switch on...and post pictures sow we can see what you are doing :)


Sent from my iPad using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer

Ok, I tested the light across the battery terminals. Light works. I attached the clip to a ground and probed the red wire coming from the battery to the switch. With the switch off, the light comes on. With the switch on, the light also comes on.
 
Re: "Patina" The 1973 CB175 Cafe Racer

a6yjazar.jpg


Hard to see but light is on.
 
Re: "Patina" The 1973 CB175 Cafe Racer

Does the light go off when the switch is off?


Sent from my iPhone using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer

Now follow the hot wire from the switch to the coil


Sent from my iPhone using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer


Texasstar said:
Now follow the hot wire from the switch to the coil


Sent from my iPhone using Tapatalk

Ok my EI had a red wire going from the CDI to the switch for power. When the switch is on, the light is on. When the switch is off the light is off.

a3ugerah.jpg
 
Re: "Patina" The 1973 CB175 Cafe Racer

Now should I check that when the ignition is on, the yellow wire going to the coil is hot?
 
Re: "Patina" The 1973 CB175 Cafe Racer


Texasstar said:
Good now let's check the power to the coil


Sent from my iPad using Tapatalk

Yellow is the only wire going to the coil from the EI, other than white kill from the harness.

5ezy9yba.jpg


Red power, green ground and yellow to coil.
 
Re: "Patina" The 1973 CB175 Cafe Racer

u9a7edu6.jpg
the hot wire from the switch should go to the left side of the coil as pictured


Sent from my iPhone using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer


Texasstar said:
is the white coming from the switch?


Sent from my iPad using Tapatalk

No, white is coming from my handlebar controls for the kill switch.

It runs through the harness to the coil: connecting with my fingers

ytaru4yb.jpg
 
Re: "Patina" The 1973 CB175 Cafe Racer

Is there power to the handle bar switch?


Sent from my iPhone using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer


Texasstar said:
Is there power to the handle bar switch?


Sent from my iPhone using Tapatalk

Yeah everything works. Headlight is within that switch and functions properly when the switch is on.
 
Re: "Patina" The 1973 CB175 Cafe Racer

Where is the yellow wire going?


Sent from my iPhone using Tapatalk
 
Back
Top Bottom