Restoration of a 74 RD350

Back again you all, been battling pneumonia again. It takes me a month to get back to somewhat normal.
Anyways I finally got the frame painted 2k epoxy primer 2k urethane. Now I will start cleaning parts with the ultrasonic cleaner and sandblast parts that need it.
20260523_070923.jpg
 

Attachments

  • 20260523_070942.jpg
    20260523_070942.jpg
    2.2 MB · Views: 94
What is the best thing to put in the gas tank to stop rust until I get to restoring the tank? If I have to reline the tank whatever I put in now I don't want it to make the sealer like POR-15 to fail.
 
If you're just letting it sit for a while, coat it with 2T oil and keep it empty of fuel.
Thank you, been struggling keeping a schedule on working on the RD350. Between family incidents, vacations and health problems. It's been slow going. I think I need to get selfish and put the restoration as a priority. Other than health issues I can put all focus on the bike. I would really like to have it ready for the Dream Cruise in Detroit a year from now.
 
I hear what you're saying... just hang in there and keep on plugging away. I'm ashamed to say that my Honda 360 project took ten years! I was still working at the time but that was way too long. I did the BMW after i retired and got it out in around two years. You're doing great and what you've accomplished so far is impressive.
 
I hear what you're saying... just hang in there and keep on plugging away. I'm ashamed to say that my Honda 360 project took ten years! I was still working at the time but that was way too long. I did the BMW after i retired and got it out in around two years. You're doing great and what you've accomplished so far is impressive.
Thanks for what you said.
 
Should I use the brass/plastic bushings for the 74 RD350 or go with the new method with needle bearings for the swingarm?
 
Should I use the brass/plastic bushings for the 74 RD350 or go with the new method with needle bearings for the swingarm?
If they are the plastic bushings with slop, I would change them. If they are bronze bushings and feel okay, I would not. Bronze bushings are plenty good for street applications. They actually require less maintainance than the needle bearings, since the needle bearings are more vulnerable to water inclusion. You have such a little arc of motion with a swingarm.
 
F
If they are the plastic bushings with slop, I would change them. If they are bronze bushings and feel okay, I would not. Bronze bushings are plenty good for street applications. They actually require less maintainance than the needle bearings, since the needle bearings are more vulnerable to water inclusion. You have such a little arc of motion with a swingarm.
Thanks I will double check. I believe they are bronze. I will assemble and see if there is any slop.
 
Back
Top Bottom