small CL 360 project

Here is the tank on the bike. I probably shouldn't post unfinished paint but I figure wtf. Keep in mind that the tank has only two light coats. It will also have the knee pads.
DSC_0863.jpg

DSC_0861.jpg
 
I Love it Troy! I don't think I'd even bother with the rising sun. It looks killer as is. I would definitely paint the gas tank tabs black once the blue cures to make em disappear.
 
Thanks valve. I'm really falling in love with the color. Those tabs do stand out. I might hit them with silver??
 
I like that color too! I actually looked at a few colors like that for my frame if I was going to go blue. I'd say if you painted those tabs silver they wouldn't probably stand out, they would blend in with the frame more...
 
Thanks guys. I have to tell ya I'm really digging the color. It looks so nice against the silver. I can't thank those enough for their support through this project! I started out wanting to make a few mods and now ended up with this. Who would have thought. The paint is rustolium Metallic and is so so sweet. Tons and tons of metalic and easy to spray. I can tell that is is not near as durable as the epoxy paint but I hope to help that with a coating of two stage clear.
I finished painting the tank today. It turned out amazing. The paint has a real deep shine. I think once the clear goes on it look even better. The gas cap needs re-done. Got some blue on it. I had painted it with epoxy silver but I must have done a shitty job taping it. I have a couple better photos but for some reasom my computer is not reading my photo card?? I'll post them soon as it decides to work.
I hope to finish my Herm shifter today and clutch parts are due monday. It's getting close.
So, do you guys think I should do the rising jap sun on the tail light? I'll mess with some photos in paint later tonight. Again, thanks guys! Troy
 
no jap sun... less is more... paint looks good get those pics up bud! pisses me off it is 50 degrees and i am stuck in the office all day long! i want to be out riding or at least repaint my tank and side covers! maybe finish my seat! but NO i have to be in the office, then get my sleve outlined... then into the shop to powder... AHHH i want to work on mine! your going to beat me!!!!
 
Ok JRk, Here are a couple more photos with the tank painted. I still need to clear coat it and put the pads back on but you can get the idea. Its a little darker than this, probably more like in the bottom photo. Yeah man great day, but there will be many more to come. Patience, patience, LOL
And I agree with less is more.



Close up of the tank. I started to remove the paint on the cap. This epoxy is some of the toughest paint I've ever come accross. I'll repaint it the same silver.
DSC_0881.jpg
 
looks awesome! you ahve reached a vital point in a build where if you keep adding to it the build can get a bit hodge podge... i think with the knee pads and tank dash added and the clear that would put this sucker right where you want it! then of course the DO THE TON decal to tag that sucker! :)
 
I have to agree. I stuck the chrome rails on the tank and the tank pad and it has a nice balance. Just the right amount of chrome, black, and silver. BTW, how did you know that I just ordered DTT decals? haha.
 
Agreed, forget the Sun, she's already "brilliant'!

Man I bet you're just chomping at the bit to get on her and see what she will do!! ..soooo close.
 
Thank you very much guys. So as it stands there will be no sun. I can't even begin to tell ya how much in awe I am over this paint. I've said good things about the appliance epoxy but the two are very different. The epoxy is very very hard. I don't think this paint will be very durable, however the stuff (once cleared) is amazing!
I cleared the the tail and tank last night. I plan to wet sand with 2000 and clear it a few more times. Sometime soon I will have it coated with two stage clear.
Decided to save the outside photos for shownshine. The inside photos just don't do justice but they'll ahve to do for now.
DSC_0911.jpg

DSC_0901.jpg

And thought I should add this one... should point out that I threw the pad and rails on the tank to see how they would look. I think the pads will help the look that much more.
DSC_0924-1.jpg
 
Thanks guys. If someone had told me that it would turn out this way, I would have never believed them. I'm soooo happy with it. My ol man looked at it today and told me that the shop I was considering having two step clear coat it could not do it justice. To be honest I kinda agree. Their work is not the best. So I'm not sure what I'll do.
Anyhow, a couple of questions. My badges suck. I put a couple of hours into them and quit. I'm not happy with them. I'd love to have a couple of custom badges made. Any ideas what they should say or look like? Your ideas would be greatly appreciated!
Next, is there anything on the bike that gets ground through the frame where I should sand the mount to bare to allow what ever it is to get good ground? Thanks, Troy
 
This, my friend, is a beautiful work of art!

I plan to use this 2 part clear on my tank and seat (when it's built). I think Beli used it on his 350's tank and seat.
http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID=21846&itemType=PRODUCT&iMainCat=640&iSubCat=640&iProductID=21846
 
Thank you Good on two counts ;)
Sounds like that spray will be worth every penny! That is exactly what I need. Didn't even know there was such thing. Thank you!

Any ideas on badges anyone?
 
Back
Top Bottom