small CL 360 project

Hey guys thanks for the props! the bike turned out better than I ever dreamed. However, I almost cried when I had to repaint the tank. I had it looking sweet then I got some big ole runs in the clear, then I sanded through it >:(
I had planned to do minor modifactions and run it for a summer before i really tore into it. Well, one thing led to another...
Right now I'm just waiting on tank decals and I'm ready to rock. I want them to go under the clear coat but it's real tempting to gas her up and worry about the decals and clear later ;D
In the near future I plan to rejet the carbs and buy new tires, but thats about it. Troy
 
Well, while waiting on my tank decals I decided to really see if I could get the bike running properly. My test ride a week or so ago lasted all of about 3 minutes so it really didn't tell me much. I never even got to take it off choke. I was trying to use the ketchup bottles to hold the gas and they were kind of fumbly (and I had a hard time keeping one of them from leaking). So I didnt want to push things.
So today, still using the ketchup bottles, it wouldn't kick start. I jumped it (I don't have the starter hooked up) and it started right up. I should mention, the battery has a full charge. Once running it really doesn't run other than full choke. I would try to take it off choke and it would die. Hit the starter (jump wire) and it would fire right up then a few seconds later it would die. I removed the Plugs and they are full of black soot. Cleaned them and reinstalled and pretty much went through the same process.
I realize that with the mods I did I'll have to rejet but I didn't think that it would be this far off. Guess I really need a Clymers because I don't even know which is the air adjustment screw.
 
Troy I have a link somewhere to the full service manual in pdf format, I will see if I can find it.

Found link,

http://www.carlsalter.com/motorcycle-manuals.asp

I had mine printed out at staples and put it in a binder cost like $16.
 
Wow man, thank you very much! I just downloaded it. Think I'll do the same and have it printed at office max or some place like that. Again, Thanks
 
Bit of an update. I adjusted the floats in the carbs today and it made a big difference. I didn't mess with it too much though because I wanted to get the tank done. Having the tank on the bike will mike it a whole lot easier to test it and get it running right.

Well looks like I'll be redoing the tank AGAIN. I think this make what 6-7 f'n times?? WTF...
What ever you do don't buy that sprayer from NAPA. Thing is a piece of shit! It loses pressure fast then when it sprays it just comes out in spurts.
For the first coat I mixed the hardener per the directions and it sprayed it out in small clumps. Called NAPA and they said to try to thin it down. I did per their directions and it sprayed a little better but still didn't seem right. Finished the second coat and decided to leave it at that. The surface is so uneaven it feels and looks alot worse than an orange >:(. I know that if I try to sand it down that I'll break through because there is just not much on the tank. And I don't think it will ever get smooth.
I think the reason the reason it sprayed good for the tail was because it was sprayed first and when the aerosol was fresh/new. However, thinking that a new aerosol may help I put a new one on for todays first coat but it seemed just as weak as the one I took off. I should have known!
My plan is to repaint the tank and hit it with rattle can clear. Pisses me off because of the effort and money lost. Live and learn I guess.
 
honestly troy... paint it back to how you had it prior to clear.. take it to a body shop... tell them next time they lay clear ask them to hit your tank... i just got a fender done for my buddy, (harley rear) for 20 bucks last weekend... and that is WAY bigger than the tank!
save yourself the agrivation.
 
Yeah man I think that would be the smartest thing to do. Sometimes you just get caught up, you know what I mean? Thanks Joe.
 
By the way, the work you did on the tank for the TX 650 is amazing! Just blows my mind!!!! What you do with the chrome powder is just sick!
 
wait till it is done... dope as hell! put some time in last night... then spent some time wiring... the fella was over workign on my air compressor all night... i hope he can get it fixed today!
 
Troy love how this started, SMALL, LOL I get a kick of how most of us always start out thread like that. Your build is anything but, small. I agree with ya we do get caught up in the "do it (all) yourself" part of the build and sometimes end up paying more money than we would have just walking into a shop and dropping off a 20 spot or so. Trying to learn where it is wise to spend on the tools to do it yourself and when it's just better to drop it off, is hard. Bike keeps getting better all the time.
 
JRK5892 said:
honestly troy... paint it back to how you had it prior to clear.. take it to a body shop... tell them next time they lay clear ask them to hit your tank... i just got a fender done for my buddy, (harley rear) for 20 bucks last weekend... and that is WAY bigger than the tank!
save yourself the agrivation.

I agree with Joe. Get the basecoat how you want it, then just drop it off at a bodyshop and ask them to hit it with some clear. Make sure you ask the guys what kind of beer they drink. A case should pay for the whole job. Plus, you make friends in the process.

--Chris
 
Hey guys thanks very much for the support and advice

Imoale, you are so right on. Damn I'm so guilty of getting caught up in the middle of something and just wanting to "do it all myself". Definitely not the first time. Haha

Body work is done on the tank and it's under primer. Hope to put color on it this evening. Decals should be here in a few days, then, get this, I'm going to drop it off at a local body shop to get cleared. ;D So much of my knowledge is learned the hard way. ;)
 
Looking good troybilt.

I'm guilty of the same thing, went out and bought tire irons, spent 22 bucks. Tried to get my ancient tire off without destroying my rim, gave up on that pretty quick, called my buddy at the shop and got the tires swapped for 20 cash lol.
 
chrisf said:
I agree with Joe. Get the basecoat how you want it, then just drop it off at a bodyshop and ask them to hit it with some clear. Make sure you ask the guys what kind of beer they drink. A case should pay for the whole job. Plus, you make friends in the process.

--Chris

GREAT ADVICE!!!! it is amazing what being cool to the workers and a case of beer can get you!
 
Hey screwed thanks alot.
Decals arrived today from Louis. They are very nice. Wet sanded the tank and put them on. They rock. Tank is now at a body shop and will be done tomorrow. 20 bucks and I'm golden! I took my sprayer with me to to see what the guy thought. He said that it doesn't have near enough pressure and I should throw it away. It's now in the trash.
Things have been crazy busy! I've been helping on a tree job as a grunt. We've been three days on one tree (there are just 3 of us). Its a Hemloc that is was 130' tall and 59" accross at the base. I get home at night and pass out (sometimes without dinner) We'll finish up tomorrow. ;D
 
Thought I should post an update here incase anyone has any questions. I've put about 160 miles on the bilke so far. Most of that was with out a rear brake. I used a lock washer on the brake arm that keeps the rear hub from spinning and it didn't last too long at all. I ended up twisting the main shaft on the rear assembly. Today I received my new assembly complete with a set of brake pads. I went ahead and used the assembly with the brakes that came with it eventhough mine were pretty new. The reason I'm posting this is because if anyone is going to do the rearset that I did up for the brake they should have new brake pads. With the other pads (near new) the throw was very short. Now that I have worn pads (they have only a little life left) the throw is much longer meaning the lever now moves about 3-4 inches as opposed to 1"-1 3/4". It still works ok but not near as good.

The other day I forgot to turn the fuel back on and ended up kicking it about 10 times befor I figured it out. It ended up fouling the plugs. Damn thing had no power what so ever. It didn't miss or back fire, it just had no power. I rode it through town but I could hardly take it out of first on anykind of a hill. Thought I may have screwed something up until I pulled the plugs. New plugs and its bacdk to starting on the first kick.

Took a few photos today. I know I saw 200 bikes today and not one vintage cafe. I found out that you get instant fame with one of these. Everwhere I went people would talk my leg off asking questions.
Here is a good buddy of mine checking out the scoot.
100_2086.jpg



On the open road.
100_2088.jpg



bought a plate light and got it mounted up. It took a while to hide all the wires but it turned out pretty nice.
I
100_2076.jpg




Just thought I'd share this.
This is Will's Harley. He did a ton of work on it. To finish it he wrapped everything in leather. He cut out templates and cut the leather to fit. His mother sewed everthing. Looks kick ass. I didn't think I'd like it but I really do.
100_2084.jpg

100_2082.jpg


Dn't mind the dirt. He was getting ready to wash it.
100_2083.jpg
 
Back
Top Bottom