Zoöid Third Times a Charm CB175

1580415748c7cbd7fdcb452133adb676.jpg
finishing one weld at a time


Sent from my iPhone using Tapatalk
 
Hi Patrick thought you might be intereded in this
http://www.hondatwins.net/forums/1-project-logs/43075-turbo-honda-175-lsr-attempt.html
 
simo said:
Hi Patrick thought you might be intereded in this
http://www.hondatwins.net/forums/1-project-logs/43075-turbo-honda-175-lsr-attempt.html
Click to expand...
on board thanks!


Sent from my iPhone using Tapatalk
 
Patrick,

Could be an illusion but it looks like forward side of the front frame is slightly offset to the right (using your blue line) ? What brand tires are those in the pictures?
 
Q said:
Patrick,

Could be an illusion but it looks like forward side of the front frame is slightly offset to the right (using your blue line) ? What brand tires are those in the pictures?
Click to expand...
no illusion it is the left rear bar that we out too much heat in it. It has been fixed since then. Those are some top secret Metzlers :) that are meant to make you wonder "what kind of tires are those?" ;) Quite the observant one you are!
 
Texasstar said:
no illusion it is the left rear bar that we out too much heat in it. It has been fixed since then. Those are some top secret Metzlers :) that are meant to make you wonder "what kind of tires are those?" ;) Quite the observant one you are!
Click to expand...

Had me scratching my head, so I had to ask! I like the tire treads; didn't think to look at Metzeler's (ME11's).. nice :)
 
Q said:
Had me scratching my head, so I had to ask! I like the tire treads; didn't think to look at Metzeler's (ME11's).. nice :)
Click to expand...
close these are not marked and have trapezoids. They are part of the vintage line that Metzler is releasing ;)
 
"God is in the details"
Is the trapizoid pattern going to be stiched into the seat as well?
 
I thought they were some sort of 'junior' flat track tyre. tread pattern is very similar to some I had a while ago
 
2495d974a38d5457667bd42916989953.jpg
I guess they don't want to go through the Pacific ocean next time I may consider airfreight.


Sent from my iPhone using Tapatalk
 
crazypj said:
I thought they were some sort of 'junior' flat track tyre. tread pattern is very similar to some I had a while ago
Click to expand...
gonna need some of your lathe wisdom!


Sent from my iPhone using Tapatalk
 
Amazing, I was just looking at a 500+ lb griz a couple days ago... they make a nice English wheel also... looking locally for a tech school on lathes/mills etc for some fancy learn'n.. need to know what I'ma doing before buying something that the wife will growl at if its just a sitting there look'n stupid :)
 
Zoöid Third Times a Charm CB175

Thanks Guys! We are thinking about using these 24mm Mikuni flat sides on Bryan's bike any thoughts? http://www.treatland.tv/mikuni-24mm-TM-flat-slide-carburetor-p/mikuni-24mm-flat-slide.htm


Sent from my iPhone using Tapatalk
 
Youre as good a person to answer that as any.
As alway whats your cc, what other mods, what gas,and where on the throttle is the bike going to spend its time
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light

    • Spread the Love

    Back
    Top Bottom