Recent content by jayfromjay

Toca 3 on ps2, Oblivion, Forza 4, Madden on Xbox.

Re: '74 CB360 cafe project - (Seat pad is complete) Wicked sweet.

Re: 1975 CB360T Milwaukee Dig it!

Click on my cb360 link to see what I'm doin with my seat. The whole build up is there.

So i blew the dust off the computer and remembered my password! The South Chisholm Scuderia is closed for the winter. It gets friggin cold up here in the north and the shop has no heat. I did manage to get all my body work done and all primed and sealed. So to remedy this issue the wife and I...

Got the seat just about finished. Didn't like the big ol' gap in the front so I have finished that with more glass to follow the tank contour. I think it's gonna be alright!

Im using aftermarket clip ons that the previous owner put on with the stock CB controls.

I used the stock ball bearings (19 top/ 20 bottom, I think or vise versa ) . i know I should have used the tapered cone type but I'm poor and I had the ball bearings. You have to use the Cb upper cup that sits in the head tube as the Ninja one is like .06 too small. The Cb cup will need about an...

The front end could not be more simple. The rear is gonna be more tricky. I'm in!

great looking 360! Nice work

looks good. nice work Dad!

Thats what i was going for Hatch. I used to play before I decided to build bikes and always loved that burst finish. Glad you dig!

While finishing up on the Cb400 seat I thought I would repaint the CB360 tank. Not that one has anything to do with the other, i just have A.D.D. and that's what happened. Have not cleared it yet. Not sure what I'm gonna do on the sides, leave em with just the Honda emblem or put some striping...

I used the stock CB bearing cup that sits in the stem and had the center cut to clear the Ninjas stem. Works like a charm. The back is a little more tricky, requiring the caliper mount to be machined on the outside to get the wheel centered and I'm still working out what to do about the rear...

cleeuw, that tank looks good after 6 months! NoneMoreBlack, if you really wanna go trick, use DuPont satin clear. The protection of a clear coat without the shine.