Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
These guys provide stainless steel hex head bolt sets for your engine, replacing your stripped out or just otherwise ugly Phillips head screws.
They come either polished or unpolished. Each kit fits your specific bike and if its not on their list call or email them, they can put something...
Here's some advise, call Dime City directley. They are well versed in their products. They will actually pick up the phone and talk to you. ( I've delt with them on many occcasions, They are all bike builders)
I cannot believe it's been this long since I've posted ( Sorry bout' that)
A quick update. I finally got the bike to run ( like Shizz ). Main problem, it's firing on only one cylinder ( 30 psi on the right cylinder). So I've pulled the motor , discovered that the cylinder walls are in good...
Vince, I tried going to the cycle seductions website, no-go . Is there a different site possibley ? I would like to run the bike without having to do the "Rick's" change out first.
sunnamp - thanks for the offer, though I've purchased a standard tank already, took the badges off, body filled to smooth everything out and have primered, just waiting for better weather to paint.
Well as for the "special tank" which was off a 350-4, it did'nt make it on due to an unfortunate deal that went sour. As for the new fuse, I found a blade style with a water proof cap, 12 gauge wire. I actually went with a crimp end connection and sealed any opening with liquid electrical...
Another update, a few weeks have passed, Me and a friend were ready to get the bike running after we had run the meter through it's paces to make sure every thing was in order and there were no broken wires and the stator was kicking back more than it was receiving ( it was ). Put the tank on...
Well I've made some head way on the bike, finished the tank ( see my post in the paint section ) Made a battery tray so I can install it under my seat, purchased some stock but better than my original shocks, cleaned up the bike some, cleaned up the carb's along with the petcock that had some...
After reading your question, you are now at the point where you need to show some pics of exactly what you are trying to describe. As they say a picture is worth a thousand replies, or something like that.
I like the model of where your HEADing also ( had to pun). If your looking to replace the seat you might want to look at RocCity cafe racers here's the link : http://www.roccitycafe.com/store.php
Sean has a great selection and they're hand made,pure quality ( not a spokeman just a happy...
Making some head way on the bondo, the badge side is done, the dent/badge area is still under construction but by having a slight brain fart I was able to build up the dent are by using the blade starting from the top of the tank and motioning downward ( I was only going front to back and was...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.