Search results

Hey Guys, Havnt been on for awhile but i finally got a new project. a CB750 Starter only , no kick start and having an issue where when pressing the starter button the starter of course moves but sounds like its grinding? After 2-3 Tries the Bike turns on. Its almost like you have to catch it...

Hey guys, I have a little issue. bike runs , but not perfect. its a 1973 cb350 twin, stock headers only and velocity stacks.. when i put it on choke, (even thou i dont need to) it dies off .. or the good question is on the left of the stock carbs what is chock on? the lever pushed all the...

Guys i KNOW theres a site out there , last i saw it had Japanese writing.. its micro turn signal and starter button. looks like this but this is just a radio shack button

After some hard work.. and still working on her The team has completed another bike. Custom seat - Leather is amazing.. same leather user for the handle grips custom made. FiberGlass seat custom and some pieces here and there are custom.. Velocity Stacks Pipes will be cut and bent inward...

So i install LED indicators for my neutral. i install a 300k ohm on the post side of the LED and when i turn the bike on, the green like turns on for a sec and off. i tried everything and still doesnt work. what gives!? =(

Hey guys, just wanted to see what you guys did to fix this. but a friend of my has an issue where his la rosa seat is WAY to stiff. it has 2 shocks like this https://www.larosadesign.us/images/SLSASHOCKS.png now we dialed down the tension till the last thread and STILL its stiff as hell...

Ok, i went in to eliminate all the wires i wont need. so i removed some, and i know which is which. BUT i have a small issue. when testing 1st, i installed 3 small LEDS for the neutral + turn signal lights in the bucket so i can know when i have it on. NOT the turn lights itself. BUT they wont...

Ok, since im taking the clutch cover off the CB350 1973 to get it polished, i noticed where the oil filter cover is .... theres NO oil filter. um... can u guys show me pics pls. its a CB350 twin.

I am not sure which way to go on this. but i want to bending the kickstarter on the CB350 out a bit more . its hitting the rear brake peg. heat then bang it out?

Hey guys, i wanted to get a spoke wrench but dont know the size of the nipple on the 1971 CB350's . anyone know ?

Hey guys.. i noticed after riding yesterday. that the shock is a bit short. maybe 8-11 inches of space before it reaches the frame on the back. do some ppl get longer shocks? is it a easy swap or need to replace things?

CB350 71, picked up a 12V 6ah battery.. i wanted to really hide it in the tail. i installed Dynacoils on her, so in THEORY if i get the new NGK's ird. with the new coil wires i installs also.. it SHOULD be good.. riiiiggghhhtttt? =) i dont mind kick starting her.. but whenever i just want to...

Hey guys, would anyone know the outside diameter of the Stock headers on a 73 CB350? i took the exhaust off and will just run straight pipes coming off the headers.. thanks in advance!

Hey qq.. if i were to polish the tank.. bare metal.. what do people do to protect it against rust etc? clear UV coat or something?

Whats a good rubber to put under the seat pan so you wont feel the vibrations as much? I heard rubber hockey puck? but their HUGE. im thinking of finding something like the rubber used in the front of the tank to frame.

Hey guys, put on velocity stacks and put aside the stock airbox. question, what is it that i should adjust since now idle went from 1k to 4 kish. since its getting more air, its also backfiring a bit. where can i start?

Theres the seat or tail.. then theres the seat pan which is covered with foam etc and can be removed. then what would you call that part that goes under the seat. usually metal. and you place all the stuff on there like rectifier, etc. and move the battery to the back. i would like to search...

CB350 1973 i took off the front wires for the handle bars. i took the black and black/white line off this is the off on switch. and connected it with a toggle switch on off. then i took the yellow/red line wire which is the starter button. grounded the other end .. ALL WORKS! cranks over. BUT...

I looked under the howto section but nothing. Cb350 71 forks i want to take the fully apart, new seals and polish them. they have some rust so i want to remove all this stuff. yes sirs i did a search. even a google search. they just show how to remove seals etc. and i found out what weight to...