Search results

Thinking of offing this bike from the stable. She is a ton of fun, but other projects are calling (like the R75/5 in my garage...) She has been on the road for about a year now, and has been nothing but awesome. Originally purchased about a year and a half ago. She's down to painting the...

Hi Guys, Ran across this on ebay, and reminded me of the honda dream/bmw r75/kawasaki g1 headlights I've seen. Unbfortunately, this looks like none of them. Has a round gauge opening, as well as a recessed horn in the bottom. I'm trying to find a trim ring for it, and eventually a headlight...

Early external spring CB350 forks have a pinchbolt lower tree, with a bottoming out upper tree. 33mm tubes. Late cb350 forks have internal spring, pinchbolt lower tree, and pinchbolt upper tree. 33mm tubes. I came across a late upper tree and tried to install on my early setup. The offsets and...

Looking to sell my CL pipes. I'm going to go a different direction on the bike. CL pipes, detabbed, wrapped, and EMGO shorty chrome mufflers. Got 60 in the Mufflers themselves, 40 in wrap, and wanting 200 for the whole shebang. Thanks! Will also include intermediate bracket and original rear...

Used for 2 rides, then upgraded to Mikuni's and these will not fit. Will include near new oil and cleaner spray cans, and 2 NEAR NEW uni filters and clamps. Bought from UNI direct here in fullerton CA for like 70 bucks for the cleaning kit, and Air filters. Would off em for 40 bones...

Bought a polished rear cb350 hub off ebay. Proceeded to lace it up to a nice akront style rim. I go to put it on the bike and bad stuff happens. 1) Feels too wide for rear swing arm. Had to force it in there pretty good. 2) New hub with original brake plate = no rotation. 3) New hub with new...

Up for sale! 2 x Rebuilt Keihin 3 Carbs (All new gaskets, jets, perfect diahragms, etc) 2 x SPARE PARTS CV carb bodies. Bags of new parts, gaskets Sirius consolidated jet kit and case! + additional jets purchased from ebay. 70/71 110/115/120/125/130 jets TONS OF JETS! lol Spare diapragm...

Looking for just a CB350 drum hub in good shape. Axle and brake plate included. Thanks!

Old. Has some nicks, and a small flatspot. Was going to polish it up, and run it, but dont have time :( I'm in it 40 bucks. Husky hub is long gone... just the rim. Genuine Akront. Will ship if needed. Located in 92887, So-Cal crappy pic... you can see the small flat spot at ~10 o clock here

These were given to me by a friend to get my CL350 rolling. They roll, hold air, and are in decent shape. If you need them to get up and rolling, they are yours for free. I'm in SoCal (92887). 18x4.0, 19x3.5 sizes

This peach was dropped off, and needed to get cut up in the name of all things holy. The engine is good for parts. Has oil in it, i pulled the plugs, no signs of water, and i shot a ton of wd40 in it. The kicker doesnt work... has a cracked fin on the head by the spark plug. CHEAP. located in...

Finally put a tach on the thing and took it for a ride. For the life of me, I cannot get it to climb past 4100 rpms while riding it. Bike: Tired motor - Has lots of blow by coming out of the breather hose.... It's going to need a rebuild soon. CL Pipes with emgo shorty mufflers Keihin CV...

Hi Guys, Looking for some replacement parts. Sr500 tank, foot peg master cylinder blinker switch Bar mounts to crown more to come. Let me know what you have! Thanks!

Fuel Tank off my CL project. I got this off ebay for 100 bucks. Holds fuel, couple minor dents, and I think I have a pair of honda badges I can include. Needs some paint obviously, but its solid. No leaks, fresh gas cap seal (a 5 dollar value!! LOL). I am asking 75 for it + ship...

Looks like my stator is shot, anyone have a parts bike that they'd sell a stator for CHEAP? Debating on bucking up for the new/rewound rick's version from DCC (200 bucks) or just get another used one to get me rolling.... Please let me know what you got! Really appreciated

So the bike will start up great, and ride great, but 10 minutes into a ride, it loses spark (thought it was vapor lock, but fuel lines are full of fuel), and just dies. The setup: Stock Stator New Harness (simplified and 14 awg wires) New Selenium rectifier Stock Voltage Regulator I fired it...

Did some searching and it appears that the aluminum shouldered xs650 hoops from mikesxs are the go-to for nice rims to replace aging stockers. On my CL350 (19"F 18"R) could I use stock spoke lengths when going to the xs650 hoops? Is there a writeup on this? (did some searching but only got...

stock headlight (no bucket). 10 bucks. CL mufflers - cut off a few inches from the muffler - 20 bucks. CL muffler hanger - 5 bucks. CL front fender = 10 bucks CL rear fender = 20 bucks STOCK CL wiring harness- uncut = make offer. CL Bars - 5 bucks. I also have factory controls, good for...

Bought em, rode it around the block 3 times, bought clip ons for purely aesthetic reasons. My loss, your gain. 25 + ship? or local to 92887 I'll do 20 and a beer :)

Hi Guys, Can someone explain the year differences in cb350 forks? When did the uppers have pinchbolts? I see some have an upper crown with pinchbolts, but my 71 CL350 has an upper crown where the fork legs/stanchions bottom into the crown. I know CB and CL lowers are interchangeable, and the...