Search results

I found a picture of this YZ426 that was customized to a semi-cafe style bike, and would love more info. or pictures of it. If anyone knows anything about it, please chime in. Thank You!

Does anyone have a recommendation on a carb rebuild kit for the 360 that contains all of the correct parts? Seems like whenever I order those things, they are always slightly wrong. Did a bit of searching here on the site, but came up empty handed. I'm sure I'm not the first person to ask...

So I have fairly decent set of CB360 carbs that I would like to run on my CB350. Long story short, I tried the "boiling in lemon juice" trick for my 350 carbs, and after about 45 minutes, there was alot of powdered aluminum in the pan, and the carbs are pretty much junk now. Anyway, has anyone...

So, I have a 1972 CL350 that is in fair shape...(runs, but needs some help). I also have a CB360 that not in too bad of shape, but I haven't even tried to get it running. I bought both bikes about a year ago, and am just now beginning the cafe process. I plan to use the frame of the 360 with...

I have a 74 CB200 with the mechanical disc brake...well it is suppose to, but the insides of the caliper are pretty much just a pile of rust. (Irrepairable) I have been looking all over for a replacement for about a month now, with no luck. Does anyone have any ideas on where I might find a...

Can anyone help me with the specs for the valve lash on a 74 CB200? I have looked through the manuals that are posted, and wasn't able to find a link that actually worked...did I miss something? There was also a link on someones CB200 build page, but it did not work either. Any help on this...

Hey guys...I now own both a CB350 and CB360. My plan is to use parts from both bikes to make a nice cafe racer. The one thing I am unsure of is what engine to go with. I have heard that the 360's had some design flaws in the top end (cam, rockers, chain slipper)...and that the 350 is actually...

http://cgi.ebay.com/ebaymotors/K-N-85-2437-AIR-FUEL-RATIO-MONITOR-COMPLETE-KIT-NEW_W0QQcmdZViewItemQQhashZitem2eab38e4d8QQitemZ200441128152QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Has anyone used one of these for tuning? I am working on a cl 350, and would just do each carb separately...

So I found this picture on the web and absolutely love it. My main questions are with the tank and the taillight. Does anyone know what tank it has on it, and what taillight setup that is? Thanks for your help!

Anyone have any experience with this company and their carbs? They claim that they are prejetted (obviously some fine tuning might be in store), but the price seems reasonable. I think I will opt for the 30mm vs. the 32mm because of the advice of crazypj...he said that they will run better for...

So, I am building a custom cafe bike...or maybe it's a sport bike of sorts. Either way, I am using the forks from an R6, but only using the brake on one side. Once I get the front end all mocked up, I will cut the caliper mount off of the right hand side of the forks. I just finished...

So I have a hub, spokes and nipples that I want to have powder coated. I would prefer to have it done before the wheel is assembled, but not sure what the best route would be. I was thinking that I would screw the nipples on the threads of the spokes so as to serve as a masking for the...

So, I have been working on my cafe build...which started as a 72 CL350 (and still is). As the build has evolved, I have decided that I am just going to basically design my own bike using a hodge podge of parts. (I will create a build thread as it progresses) This leaves me wide open for a...

So, I am planning on replacing the diaphram carbs on my '72 CL350, but am not sure what to go with. I will be opening up the intake and exhaust a little, so I am pretty sure that I want to go with 32mm's. What do you guys/gals think? Round slide or Flat slide? What are the...