Search results

Need intake valves, pistons and 4 rockers for a CB 350f If you have a complete engine either 350f or 400f I wouldn't mind knowing the cost I'm dead in the water and would like to be back on the street soon

Tried to go out and fill the tank this evening to no avail. She fired off as usual but since I didnt have the throttle set so she died from being cold (nothing unusual there) Went back to crank again and I swear I heard something break inside. Sounded like aluminum breaking in half. Motor...

I removed the head on my 350f to fix the leak with new gaskets and found that two of the studs have worked their way loose. Is it advisable to pull these and add some thread lock or just tighten them back up without it.

Looking for a set of factory pegs and controls

Think I want to go with silver or aluminum paint but I am having a hard time finding pictures of anyone who has done it. Seems everyone that is painting is going black. Is there anyone that can share a picture of any other color exhaust except black and chrome?

Due to a misfortunate meeting with my header and a sharp edge on my motorcycle trailer I now have a hole to fix (red arrow). Going to take the chance to repaint while I have it off. Question is would it be a good idea to take it to a muffler shop to get the dents (yellow arrow) fixed or is it...

Left my truck at the shop today and rode my 350f home and am wondering if I should risk riding it back in the morning. Problems started with the bike cutting out around 4 grand. Then when I stopped behind a car the headlight went out comes back with high revs. Multimeter is at the shop so I...

I have a set off of a cb500 but they are 8" over. Looking for stock length.

I have got the front end off a CB500 that I would like to put on my 350 but the forks tubes are extended. No big problem since the tubes are rusted anyway. Question is do I just need stock length fork tubes or do I need the springs too? Are these the stock springs with an "extension" screwed...

Airbox - 2 of the 4 rubber boots are in usable condition, the others have holes in them. Spring clip for the filter and fuse holder with 3 fuses. Rubber connecting gasket Tank has two shallow dents in the top and one deeper where the paint is chipped. Side covers are in good condition with...

Whats the safest method/stripper to use for removal of the rattlecan paint the PO put on the side panels of my cb350f to prepare it for new paint? I don't want them to melt away with harsh chemicals.

Just doesn't look right on my bike (IMO) like i thought it would :o. I have converted it to 12 volt 8) and the light does indeed work. Hooked the speed O up via cordless drill and it also works ;D. The chrome was flaking :'( when i got it so I have scuffed it to prepare for paint. There...

Looking for this part in particular CB350 Four

Need two for CB350f original signals Anyone have em before I order from Canada?

Does anyone know where I can find some more pictures of this bike? Preferably the rear fender http://1.bp.blogspot.com/-diPXGu-Z4XY/TqRs_xfdXHI/AAAAAAAAANA/M_QMJlfOQbc/s1600/blurBrat.jpg

Looking for just one single little size 35 slow jet. Anyone got a spare?

Looking to put some Progressive 412 shocks on my cb350f but with them being eye mounts and Honda having the lower clevis mount, some modification is in order. I was thinking of welding a new mount but I found this today and wanted to know if anyone has tried this approach.

In need of a seatpan for a 350 four. Would prefer it to have the hinge and latch, but not a necessacity.

For those that still use the stock air box, what are you using for filtration? Stock air filter, aftermarket filter, or homemade foam filter

Message me if you see anything that strikes your fancy and we will see if we can work out the details. Also have the rear wheel/tire, shocks, luggage rack and backrest not pictured. Motor is free but I havent got around to checking the compression. No title on the frame.