Search results

I have an entire CB360 that has had a lot of work done and never finished the bike. I would sell the whole thing for 300 (you pick up) or part it out. The bike has a powder coated rear rim, stainless spokes and a tire that has never been driven on. The front disc has been cross drilled, front...

Hey guys, I have been working on this bike for quite some time and have just lost interest. The bike has had most of the difficult stuff done to it. Carbs completely redone, soda blast, all new jets, diaphram, orings and had them syncronized by a 30 yr Honda tech. Had the shocks completely...

I'm working on my CB360 tank. I have cut it apart and now I'm looking for a new bung to weld onto the tank for the petcock to thread onto. Does anyone know the size of the threads or know where I can find the bung that will fit. Thanks for the help.

I just put the threadbond on and thought I had the correct info on my screen. I found out I didn't and now I need help quick. lol Anyone out there know the torque specs for the head cover bolts? Thanks

I just read a few hundred threads on sealer but I am not sure what my local shops carry around me. Loctite 518 threebond, Honda Bond? is one any better for my application. Would Permatex ultra Black hi-temp silicone gasket maker work? I only ask because I have a brand new tube still unopened...

I tore my motor apart a while back. Being this is my first build, I never remember if I have thrown crappy parts out during the disassembly or if Im just missing parts. Does anyone know off the top of their head if I should have two or four stud spacers between the case and the cylinders? I...

I have been going through the manual and either Im not using it correctly or it doesn't show what I should torque the rear fixing bolts? (Sprocket to hub bolts) to. Did anyone need shims when eliminating the sprocket protector? Thanks

I own a74 cb360 that I have cleaned up and now assembling. IM wondering if the piston rings need to be orientated a certain way and if so, which way. Second, does anyone have a method for compressing the rings without a special compression tool? Finally, to add or not to add anything to base...

I'm trying to find a tire that both performs well and looks good. I'm hoping to find a modern sport bike style of tire. Both rims are stock and Im planning on going 90/90 18 front and 100/90 18 rear. I have a picture of a pair of tires that I really like but I know nothing about the...

Looking for a 74-76? CB360 front fender. Something free of dents. A bit of rust doesn't bother me. Thanks

Anyone want to trade me something for my seals? I bought several pairs in case I messed up putting them in. Otherwise 5.00 and I will ship them to you. Thanks

I have a 1974 CB360 head that has been to my local machinist and had everything cleaned and redone. The Cam journals aren't the best but I was told by several people on here that they should be fine for quite a while. I don't want this stuff laying around the garage so Im getting rid of it. I...

I'm looking for a CB360 tank. Color doesn't matter and a few dents are fine. I just need a clean interior. No sealers. Thank you.

I just picked up a Cb360 head from a seller on here. I know nothing about the wear on the inside of these motors but this seems a bit excessive. I just want to know if its normal so I can stop worrying and move along with vapor blasting it. Thanks

Would like all aluminum but Im ok with something else if they are inexpensive. I would prefer black but again, Im open if the price is right. Thanks

Looking for something a little better quality but I'm open to whatever is in nice shape. Thanks

I am looking for a bigger rim for the rear of my cb360. 2.15 36 spoke 18" rim. I don't need the hub and spokes but if you would rather not take it apart, that's fine too. Im hoping to find something in good shape, no dents or dings. chrome doesnt need to be perfect. i will be podercoating it...

I did some research on removing the rubber pieces out of the rear hub but I didn't get anything too positive about the procedure. Im doing it one way or the other and Im hoping someone might have another idea worth trying. Worse case I will pick up an extra hub if it doesn't work. My goal is to...

I design some decals for a fellow DTT member and had a bunch made up at the same time. It wasn't cost effective to do one set so I figured I would order a bunch and try to sell them at a fair price to everyone. The decals should be near exact to the information I went off of. Some are Laminated...

I finally took apart my second gauge and found the foam/rubber that sits between the actual gauge and the aluminum backer, completely shot. If someone has a broken gauge with good foam, holler at me. Thanks