Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I wasn't entirely sure where to post this, but i am looking for part 13 and 14. Does anyone have one that i could buy? Or does anyone know where to get one. Thanks
I can not figure this out to save my life. I have a 1972 cb350 and just put on new controls that are high low off and kill switch. When i wired them into my system electricity is only going to coils when the kill switch is pushed in. I have to black wire going to the coils and the white wire to...
So my idea is that I will buy 8 6v 1.3ah batteries put them in a series and parallels to get a 12v 5.2 ah battery. I really like these batteries as they are only 1 inch thick meaning they will fit flush with the seat frame. Will 5.2 ah be enough? I am running kick only with led tail light and...
About two years ago I bought a 1972 honda cb350 in a box from a guy in Canada. At the time I knew very little about mechanics other then what I have learned in engineering school.(alot of theory very little hands on). Since then Ive put it all together and have it running pretty well. I plan on...
Okay so I am trying to figure out the best way to hook up this battery eliminator to my 1972 honda cb350. The issue is the ground wire to the frame seems to be too thick to fit into the bullet connection. Have any of guys done this/ any idea what to do? Thanks
Okay so i set my valves for my cb350 and when i went to start it there was nothing. So i took out the spark plugs to see if they had spark and only one side had spark. Then i switch the wires around and then the other side had spark. What does this mean? Bad Coil or Condenser?
Ill make this short. I am adjusting my valves and have the engine top dead center, i manage to set the intake valve but when i went to set the exhaust valve the rocker arm wouldn't even move. There is almost not space between the rocker and the valve, the .0015 in. doesn't even fit between...
Okay so here is my dilemma. I took my bike ( 1971 Honda cb350 ) over to a friend's because a gasket was leaking and he was going to help me change them out. Well low and behold you have to take out the engine to do so we decided that it would wait for winter. So when the bike's top end was...
Okay so here is my dilemma. I recently bought a 1971 CB350 and have some concerns about the clutch. When the bike is in gear and I push in the clutch, the bike feels as if the clutch isn't fully disengaging the engine. Also when kicking the bike with the clutch in and in gear the rear wheel will...
So I have been following this forum for a while now and decided it was time to finally make an account. I don't know a lot about bikes but I can read a manual and that has gotten pretty far. I am currently working on a 1971 cb350 that I bought last year in a box and just got it running last...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.