Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Nice work. Love the vapor blasted look. Don't forget to clean each and every hole and thread out to get the blast media out. Particularly the oilways. It only take one or two grains of abrasive to ruin a fresh crank.
Had a self learn session on the lathe at work, had to take 0.5mm off the sleeve for the rear axle/wheel and managed get it done. Quite proud of myself.
Oh shit yeah, thinking of doing two running from the opposite side of the shock out at 45's in the same pipe I've used. Then doing small flat gussets in 3-4mm steel between the upper mount and the brace.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.