Tnx alot!
Well, the new seay/tail is just started, something to build upon. I will cut a big hol in the backend so I can slip the cover over the batteri. But the shape will be .... well, don't know yet
But probably pretty much as the 2 other I have done, just not such a complicated construction. So I hope that the function of it will be like theese "caferacer-seat" you buy on ebay, but the looks of it will be my own design
Well, polishing isn't a very pleasent job, but as soon as you have used 200-400-800 paper, wich can take some time... and then polishing will take not more then like 15 minutes... but this is how I did it.. and the resault is NOT perfect, but good enough for me
Ofcourse you shall!! It's a struggle every now and then... but it is sheep and a quite "forgiving" material to work with. You can get quite far with pretty inexpensive tools... and get really good resaults with some tools, like a shrinker and a sheep plannishing hammer.
On my wishlist is an English Wheel to really make smooth curves and also is quite... the hammer is noisy, if you share garage
I would say that it's only the gastank that takes some really good work... as you want it to keep the gas inside, and not dripping on hot exhaustsystem
But all other parts... you just need some fantasay and .....