Search results

I had my stock hoops powder coated for $87.50 from Seattle Powder Coat. It's a option. I don't know about the Ebay ones?

do you have a CB400/350f manual? I have one in PDF form that can be emailed to you.

If you see a guy on a Blue cb400f with a gold flake helmet come over and say hi. I'll buy you a beer and shoot up the bikes with ya.

GO!

find the GSXR carbs it's your best bet.

ya I'll be there. look for a guy who looks like this: Matt aka:thirsty but without the coast behind him. I'll take it your name is Mark.

Just a remionder that this will probrobly be the last decent one of the year. www.backfiremoto.com This wed the 21st of Oct. Weather should hold out and be in the mid 70's! Cheers thirsty 1 ;D

I'm out >:( . My starter went tit's up and I wont have a replacement by the morning so I'm screwed. Sucks but I'm not gonna push start the bastard all day! I'll have one by the next backfire nite in Ballard on the 21st. Take lots of pics. Later Matt in Tophat

go here and you can download the factory service manual. http://www.cb750c.com/

If those carbs say CR on the sides you don't need the stock air box. There the good flat slides and are easily tunable. I'd say do it. If you don't like the carbs sell them. They go for about 350 a set.

:D

Well it's been a few months with some up's and downs for the bike but its' to the point now where I'm satified till it starts to rain again :o . I do live in Seattle so I gotta ride when I can. I came upon a bit of a problem after my first few rides. I had an alcohol induced moment and only...

I realize this complicates the handling but it is an option. You guy's could alway's drop the fork oil level enough to get the look you want. The fork tubes will ride lower in the legs achieving a dropped front end. This is basicly what I have done. The ride is a bit softer but jacking up the...

you can get parts from Z1 www.z1enterprises.com

It has a flat spot in it right? Make it round again. Take a round something and put the dowel (right?) on your bench/floor/vice and pound it into it. This will straitend (Re-round it) out the flatend part of the dowel. File off the points that dont fit. Those dowels are for alignment of the...

I'll be out there too. I finally got my bike running reliably. I'll find your bike and shoot the breeze. Matt AKA thirsty

You will need this site: http://www.cb750c.com/modules.php?name=Forums&file=index sign up and make an account. Good info here: http://deuceswild.yuku.com/ I've had my engine scattered look here: http://www.dotheton.com/forum/index.php?topic=19923.0

theres a link in the bottom of my sig. look there. ;)

Do it up! Go!!! ;D

Re: '80 CB750c Build first bike build Keep it up dude! Looks good. yur gonna need this www.cb750c.com or http://www.deuceswilddohc.com/main.html