MotorbikeBruno
Over 1,000 Posts
Also, I'm not sure you want to remove the overflow tube and re-fit. They should be press-fitted into the bowl, which makes them likely to crack over the years of vibration. Just use MECHANICAL solder versus electrical solder, with some flux and they'll fix the cracks. I have to solder about 10 of those a year with the carbs people bring in for cleaning. As for the missing jet, you can likely find a replacement one easily enough. If you get stuck, holler and I'm sure someone will get a link to what you need pretty quickly. Keep going! This is shaping up nicely