I think you'd get way better performance, especially since you bored it out, with the 2into1 Supertrapp.Yep, sounds very nice.
If I keep the Hedgehog I’d strongly consider selling off the CL pipes and replace w/ a low 2-1 w/ a Supertrapp.
I think you'd get way better performance, especially since you bored it out, with the 2into1 Supertrapp.
Several months ago there was a pretty decent looking MAC for a 360 on eBay for very reasonable. Probably shoulda got it, but I didn't. There's a certain "charm" to the CL pipes.
The MAC 2-1 is kinda cheap-o... I had one on my old 360 and HATED it. I ended up with extended CL pipes and Emgo Shorties on it and that worked out pretty well. Got another friend with a similar setup and his 360 rips. (for what it is.)
Never a problem my man, interesting reading. Now you guys got me thinking...(Sorry to hijack your thread, Eric.)
Never a problem my man, interesting reading.
Sure, why not? You've gotten into making everything so durn pretty lately though, once you take the old Cherry Bomb down that rabbit hole it'll end up coming out the other end a completely different animal!Now you guys got me thinking...
After I install the 378 kit (complete and sitting on the shelf ready to toss in) Maybe go dual Supertrapps on Cherry Bomb!!!
Stock swing arm and disc brake for starters. haha.Sure, why not? You've gotten into making everything so durn pretty lately though, once you take the old Cherry Bomb down that rabbit hole it'll end up coming out the other end a completely different animal!
Yes, Paint base, add decals, burnish them as smooth as possible. I got some small air bubbles under mine...sucks as they show through. Then clear. After 24 hours the Spraymax can be wet sanded. 1000-1500-2000 then polished. I used Meguires 105 then Ultra polishing wax.That looks seriously good. Do you paint the base then add decals and clear coat over them? I'm considering doing my fuel tank with rattle cans and already ordered the spraymax 2k clear, just wondering how to do the decals.