Got a toggle switch through today. Its going to be mounted in the headlight and replace the started button as Im running kick only. Its going to be used for the headlight, whether for the light be on or off, or for the fullbeam to be on or off is undecided yet.
<img src="http://imageshack.us/a/img10/9936/09032013589.jpg" alt="Image Hosted by ImageShack.us"/>
Continued working on the frame, trying to lose some weight.
Started trimming battery tabs and such off, as well as grinding the centre stand mounts. I also removed the cross brace bar for the side stand, which will be repositioned securely later on. Also removed the chain guard mounts on the swinngarm as I wont be running one, atleast not one on the original mounts anyway.
Then I got particularly anal, and started removed weld spatter and filling in the spot welds. Told you I was doing it right this time!
haha
<img src="http://imageshack.us/a/img824/5614/09032013590.jpg" alt="Image Hosted by ImageShack.us"/>
<img src="http://imageshack.us/a/img255/3711/09032013592.jpg" alt="Image Hosted by ImageShack.us"/>
<img src="http://imageshack.us/a/img255/5858/09032013593.jpg" alt="Image Hosted by ImageShack.us"/>
<img src="http://imageshack.us/a/img542/315/09032013595.jpg" alt="Image Hosted by ImageShack.us"/>
I still have some shaping to do on the rear of the swingarm to make it match the other sides curves.