Father Son 75 CB200T Rise From the Ruins

Is this short enough?
zyrajavu.jpg
4etygate.jpg
anujanaj.jpg



Sent from my iPhone using Tapatalk
 
That's getting there, but what is that huge lump on the top with all those sharp edges? :)

Not a very modern design, but it does have a short skirt.
 
teazer said:
That's getting there, but what is that huge lump on the top with all those sharp edges? :)

Not a very modern design, but it does have a short skirt.
Click to expand...
yes and it doesn't save very much weight. Time to call JE or arias and see if we can get an asymmetrical short skirt beauty. No valid reviews on TBOLT everybody is saying I will hold your beer you go first...on the forums.


Sent from my iPhone using Tapatalk
 
If it were me, I'd drop the money on the TBolts. Run them in for a couple of hundred miles and then disassemble.
 
Sonreir said:
If it were me, I'd drop the money on the TBolts. Run them in for a couple of hundred miles and then disassemble.
Click to expand...
That is a good idea! It wouldn't be the first time to be a pioneer ;) there was one review on tbolt that said he used them with ceramic liners.


Sent from my iPad using Tapatalk
 
http://youtu.be/-YBPkUhW9vU out first part made on a lathe and the first time we got to see it in person!


Sent from my iPhone using Tapatalk
 
4u2a7ybu.jpg
starter block off plug! Our DTT family is fricken talented. Inserts from the inside has a partial shoulder to keep it from being pushed through and is held in place by the cover.


Sent from my iPhone using Tapatalk
 
Texasstar said:
That is a good idea! It wouldn't be the first time to be a pioneer ;)
Click to expand...

Yep. It's like a bicycle race, we have to take turns to lead the pack and you have just been promoted to run up front for a while. :)
 
teazer said:
Yep. It's like a bicycle race, we have to take turns to lead the pack and you have just been promoted to run up front for a while. :)
Click to expand...
truth be told I like dancing with a short skirt :) tbolts are on their way! So glad my wife hates valentines so I guess buying some pistons will make me feel better :)


Sent from my iPad using Tapatalk
 
Texasstar said:
truth be told I like dancing with a short skirt :) tbolts are on their way!


Sent from my iPad using Tapatalk
Click to expand...

I'm not sure how to take this?!?! I will assume since we have met that you are implying that you like dancing with a female in a short skirt and not you wearing the short skirt whilst dancing.

Option 2 might get you a paycheck on youtube though...

Just poking a bit of fun, keep on building awesome!
 
HandMeDownHawk said:
I'm not sure how to take this?!?! I will assume since we have met that you are implying that you like dancing with a female in a short skirt and not you wearing the short skirt whilst dancing.

Option 2 might get you a paycheck on youtube though...

Just poking a bit of fun, keep on building awesome!
Click to expand...
well stay tuned it could go either way...let's hope I don't end up wearing it ;)
 
Oh don't you love the paradoxes of life. Sometimes you have dance with a skirt not be accused of wearing one. However I know some ladies who have bigger balls than some of my male friends. At least I am not like my friend Chris...and thank God it wasn't called droppants.com
 

Attachments

  • image.jpg
    image.jpg
    168.6 KB · Views: 202
yqa6yza9.jpg

Stage 4 tuning coming up:
Remove starter
Install megacycle cam (finally)
Fabricate intakes
Install swing arm spools
Detab frame and paint
Install cb77 pw Superhawk Carbs
Make carbon fiber velocity stacks to match the polini shape we have
Fab a carbon fiber rear fender
Install supercap capacitor
Rectify and regulate

Stage 5
Install new bronze valve guides
Install slipper pistons
Flow bench head
Gas port intake
Install lighter valve train
Take care of flappy politician mouth cam chain tensioner
Fabricate exhaust

Anything else we are missing?


Sent from my iPhone using Tapatalk
 
Not that it wasn't interesting before, but this is where we really separate the men from the boys. :)

Building up the internals of an engine is no mean feat. It requires an exacting nature and very much attention to detail. Be prepared for parts wanting to occupy the same space at the same time. If you don't already have some Dykem and plastigauge, it would be a good investment. Some Plasticine is a good idea, too.
 
Ok guys how do we bush the conrod? Hold the bushing in place? Get oil to the pin!
aqytu6a7.jpg



Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom