Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
the stator of the honda twin has 3 wires coming out of the thing. each wire is attached to a coil that is attached to each other. (not the frame). these 3 wires are 120 degrees out of phase with each other. a magnet passes over the 3 coils and current is generated.
each stator is a phase!
3 stator wires is triple phase exactly the same as it is in the inline 4 that has 3 stator wires too.
2 phase is found on many scoots the, g6y is a honda, single phase is found on dirtbikes with only a lighting stator.
the stator of the honda twin has 3 wires coming out of the thing. each wire is attached to a coil that is attached to each other. (not the frame). these 3 wires are 120 degrees out of phase with each other. a magnet passes over the 3 coils and current is generated.
each stator is a phase!
3 stator wires is triple phase exactly the same as it is in the inline 4 that has 3 stator wires too.
2 phase is found on many scoots the, g6y is a honda, single phase is found on dirtbikes with only a lighting stator.
I promise you, Honda twins are single phase. Also, there is only one stator. Most dirt bikes are AC. And it's a gy6, engine. A gy6 is not a Honda engine. Show me a Honda that came stock with a gy6. They are also single phase.
come on guy, I studied this in '87. the number of stator wires determines how many phases you have.
I'm not going to argue nonsense but I will explain where the op went wrong and where they went wrong on the twins site where the idea came from.
the onan regulator is 2 phase. the op only used 2 out of 3 stator wires and was doomed to fail. you need to rectify the third phase for the onan to work.
come on guy, I studied this in '87. the number of stator wires determines how many phases you have.
I'm not going to argue nonsense but I will explain where the op went wrong and where they went wrong on the twins site where the idea came from.
the onan regulator is 2 phase. the op only used 2 out of 3 stator wires and was doomed to fail. you need to rectify the third phase for the onan to work.
How many yellow wires are on an aftermarket reg/rec for a Honda CB360? How many for a Honda CB750? The amount of YELLOW wires tells you how many phases the reg/rec is for.
Here is a reg/rec marketed for a single phase Honda twin such as a CB360:
Here is one marketed for a 3 phase inline four, such as a CB750:
irk, first I was a biker. later got my doctors degree.
how do you not know how many wires a cb360 has coming out of the stator? you own 2 of them. 3 wires = 3 phase.
each stator coil is a phase. each phase needs to be rectified. the number of wires coming out of a rec/reg does not mean shit. the onan is a prime example. there is no black ground wire. it wont work if it's not bolted to the frame.
the pics you put are of 2 different types 3 phase rec/reg
the first pic is an ac shunt with positive in common with the rectifier. if it is what you say it is then green and pink have to be rectifier wires too.
I think its bullshit though. pink usually is AC to the headlight. looks like a scoot part or its a stock photo. I would not use this part on a honda twin. I would use the shunt with 3 white or yellow wires.
the bottom pic is a alternator, type the extra wires control the field coil.
what does this have to do with anything? there are 3 wires coming out of a honda twin stator. tell us how they get wired?
irk, first I was a biker. later got my doctors degree.
how do you not know how many wires a cb360 has coming out of the stator? you own 2 of them. 3 wires = 3 phase.
each stator coil is a phase. each phase needs to be rectified. the number of wires coming out of a rec/reg does not mean shit. the onan is a prime example. there is no black ground wire. it wont work if it's not bolted to the frame.
the pics you put are of 2 different types 3 phase rec/reg
the first pic is an ac shunt with positive in common with the rectifier. if it is what you say it is then green and pink have to be rectifier wires too.
I think its bullshit though. pink usually is AC to the headlight. looks like a scoot part or its a stock photo. I would not use this part on a honda twin. I would use the shunt with 3 white or yellow wires.
the bottom pic is a alternator, type the extra wires control the field coil.
what does this have to do with anything? there are 3 wires coming out of a honda twin stator. tell us how they get wired?
no you don't get it. I'm not a troll. what's wrong with this 3 phase part? it's the one I would use. and it still has nothing to do with the original post where the dude only hooked up 2 of 3 stator wires.
irk, first I was a biker. later got my doctors degree.
how do you not know how many wires a cb360 has coming out of the stator? you own 2 of them. 3 wires = 3 phase.
each stator coil is a phase. each phase needs to be rectified. the number of wires coming out of a rec/reg does not mean shit. the onan is a prime example. there is no black ground wire. it wont work if it's not bolted to the frame.
the pics you put are of 2 different types 3 phase rec/reg
the first pic is an ac shunt with positive in common with the rectifier. if it is what you say it is then green and pink have to be rectifier wires too.
I think its bullshit though. pink usually is AC to the headlight. looks like a scoot part or its a stock photo. I would not use this part on a honda twin. I would use the shunt with 3 white or yellow wires.
the bottom pic is a alternator, type the extra wires control the field coil.
what does this have to do with anything? there are 3 wires coming out of a honda twin stator. tell us how they get wired?
Let's try this again. I have attached two pics. One is of a single phase alternator. One is of a 3 phase alternator. Take a wild guess what each wiring diagram the pics are from. You have to be trolling, but we can't have a bunch of false information spread on the forum either. Someone might actually believe you're smart and that you know what you're talking about.
now that's a good pic. a 3 phase generator running a 3 phase motor. how is the honda twin generator any different with 3 wires coming out of it. what difference does it make if you have a magnet or a field coil?
I do know what I'm talking about because I studied electrical engineering at ny institute of technology summer '87
I still think you are a troll. You have to be. But, here goes. First of, what you are seeing as red is actually pink.
Yellow - AC from alternator (this wire is split, with one leg going to the handlebar control switch and one going to the regulator and rectifier
Pink - AC from alternator (this wire goes directly to the rectifier)
White- Sensing wire (this wire hooks to black wire on the reg/rec I posted)
I still think you are a troll. You have to be. But, here goes. First of, what you are seeing as red is actually pink.
Yellow - AC from alternator (this wire is split, with one leg going to the handlebar control switch and one going to the regulator and rectifier
Pink - AC from alternator (this wire goes directly to the rectifier)
White- Sensing wire (this wire hooks to black wire on the reg/rec I posted)
there is no point to argue. I went to grad school and I know different. there are lots of members here. some know what I'm saying.
this quote is from electrical 101 on this site
Rectifier - Most everything on your bike is designed to only use DC voltages and so the rectifier exists to convert the AC voltage from the alternator into DC. The standard design is a bridge rectifier. A bridge rectifier is a series of diodes arranged into a loop with an AC wire located in between each diode. The properties of diodes are such that current can only pass through them in one direction. So if you wire diodes into a big circle and connect AC wires in between each diode, you can guarantee that at any reading point in the loop, you're only getting current coming one way. It's very common to see rectifiers paired in the same physical unit as the next item on the list.
since the honda twin stator has 3 wires then you need a 3 phase bridge rectifier.
(Or it could be that the number of wires coming out doesn't dictate the entirety of the design of the stator...just sayin'. Royal Enfield Bullets with AC lighting and DC ignition run a three-wire, single phase alternator...)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.