The DT swinger and the rd swinger were not a direct swap. So I cut down a spacer or two and now have a perfectly alligned rear wheel with Caliper hanger. After playing with the caliper itself on the hanger, I will have to use a shim or two on th caliper, but that is easy.
The front wheel will also need a spacer/dust cover. The DT triples are narrower than the RD triples. So, the speedo drive was too large to fit. I started to grind it down, and went a little too far. Destroyed it. Ha. The disc side spacer is perfect, though.
No pictures, I'll get some later.