Teazer, good to hear from ya! That is the tz design I had in my mind, but I don't know if I have it in me to do that much frame mod after all. As far as the wet noodle frame, I do plan to weld in some gussets. I had a thread saved on 2strokeworld that outlined it well, but all that seems to be gone.
I had thought quite a bit about doing the ex linkage swinger too. @clem seemed to have good luck with his on his ds7. Whatever it ends up being, I'll likely stick with this wheel set. I'm a fan of the spokes. I have a lathe and reckless disregard, so it should be manageable.
I have a lead on a banshee motor. I am not afraid of the fab work to make it work in this frame if so, but I've read that the atv trans ratio leaves a bit to be desired on the street. Have you dabbled with those motors much? Thoughts?
Sent from my SM-S102DL using Tapatalk
I had thought quite a bit about doing the ex linkage swinger too. @clem seemed to have good luck with his on his ds7. Whatever it ends up being, I'll likely stick with this wheel set. I'm a fan of the spokes. I have a lathe and reckless disregard, so it should be manageable.
I have a lead on a banshee motor. I am not afraid of the fab work to make it work in this frame if so, but I've read that the atv trans ratio leaves a bit to be desired on the street. Have you dabbled with those motors much? Thoughts?
Sent from my SM-S102DL using Tapatalk