A Tale of Two Zeds
- Thread starter Bevelheadmhr
- Start date
I have have the time to work on the bike again. Currently in the middle of rebuilding the engine.. Soon found a problem, one of the many boxes containing the engine parts has gone missing. Looked everywhere for it, but can't find it. That box held a lot of the engine internals, along with the engine covers and a few new small items.
No doubt it'll turn up in six months time. Cant wait that long, so had to find used replacements from Ebay and a few new items from Z-Power etc.
Got most of the bottom end done, but now waiting for parts to arrive to fit the pistons, block and head.
In the meantime took the Mikumi VM carbs apart, they were worse than I expected. The homemade black paint was peeling off, while one of the floats was badly damaged, one carb had a missing spring.. god knows how.
Spent hours slowly stripping off the old paint, the carbs have been rebuilt unpainted, the choke rod is rusty, so going to try make a new one in stainless.
No doubt it'll turn up in six months time. Cant wait that long, so had to find used replacements from Ebay and a few new items from Z-Power etc.
Got most of the bottom end done, but now waiting for parts to arrive to fit the pistons, block and head.
In the meantime took the Mikumi VM carbs apart, they were worse than I expected. The homemade black paint was peeling off, while one of the floats was badly damaged, one carb had a missing spring.. god knows how.
Spent hours slowly stripping off the old paint, the carbs have been rebuilt unpainted, the choke rod is rusty, so going to try make a new one in stainless.
Attachments
That's every builder's nightmare – finally getting time to work on the bike and then discovering an important box of parts has vanished! Hopefully it turns up eventually. Good call sourcing replacements so the rebuild can keep moving. The Mikuni VM carbs sound like they needed some serious attention too. Looking forward to seeing the engine back together. If you're still hunting for quality engine components and rebuild parts, I found some useful options here: https://tmfcycles.com/engine/ . Best of luck with the rest of the build!
I'm in the UK so that may be a little far away lol. I've since bought another dismantled engine, when I went to collect it, the owner asked me if I wanted to buy his never completed KZ650 cafe project. It was so cheap, how could I say no.. So now I have 3 Z650 engines and three Z650 projects... As earlier this year I bought a Z650 frame, for a future project, which has progressed much faster than I had expected. I had the front end/wheels from a modern Kawasaki Z900RS, along with a swing arm from a Yamaha XJR1300, all of which had been modified to fit an old KZ1000. That project is dead, but luckily those parts when into the 650 frame with very little work..
Pics are the GPZ750 engine slowly coming together. Cases have been cerakoated and covers powder coated..
And my two new projects, the first I call Deja Vue, and the second I'll probably build as a cafe racer, with different bodywork and a half fairing..
Pics are the GPZ750 engine slowly coming together. Cases have been cerakoated and covers powder coated..
And my two new projects, the first I call Deja Vue, and the second I'll probably build as a cafe racer, with different bodywork and a half fairing..
