Father Son 75 CB200T Rise From the Ruins

i just wanted to say that today we installed the .85 (well actually .86 as the .85 were out of stock) mains and she runs like hell now. Nice coffeebrown sparkplugs and a lot of power for a 200 - happy campers, the gf smiled the whole testride as i could see her in my mirror :) good day. So, anyone with a 200 and CL exhaust, get 85 mains and pods and be good :)
 
Bert Jan said:
i just wanted to say that today we installed the .85 (well actually .86 as the .85 were out of stock) mains and she runs like hell now. Nice coffeebrown sparkplugs and a lot of power for a 200 - happy campers, the gf smiled the whole testride as i could see her in my mirror :) good day. So, anyone with a 200 and CL exhaust, get 85 mains and pods and be good :)
that is great news Bert! Say hi to Bons!!!! Jene! I love DTT because we all share info and hopefully save some from making the same mistakes that plaque our little CB. It is amazing how much a difference just one set of jets makes on the dyno!

Veilig te rijden
 
Texasstar said:
that is great news Bert! Say hi to Bons!!!! Jene! I love DTT because we all share info and hopefully save some from making the same mistakes that plaque our little CB. It is amazing how much a difference just one set of jets makes on the dyno!

Veilig te rijden

Will do! Yeah, great community! :)

Ride safe = "rij veilig" ;) but i got it :P
 
ill try to make a movie today. too bad we dont have a tachodrive anymore due to the oil-line mod. Would be nice to do a comparisson as i also tuned the ports and valves ;)
 
Here are the tungsten carbide dremel tips we found at Lowes. Now we have the pen type adapter for our dremel (we love our dremel) the drum sanding rollers fit nicely into the mini ports of the cb.

Here is a port by Hansen Racing that we are trying to mimic. The way you learn is by covering the Master Artists...Michelangelo, Van Gogh, and Hansen!
 

Attachments

  • image.jpg
    image.jpg
    225.9 KB · Views: 272
  • image.jpg
    image.jpg
    86.8 KB · Views: 296
whahaha i used a dremel with extension cord and the sanding thingies on the rubber roll aswell. And i used the Hansen website for reference hahaha great minds think alike ;)
 
Well if you wonder why MBA's have a zillion classes in statistical analysis this is why...you discover neat things like the answer to why???

My buddy Simo from New Zealand pointed out that the cb175 is 3mm shorter than the Cb200 piston. Now if you felt the end of a cb200 piston it is very top heavy. I would like to weigh the two and see what the difference is. However it could be one of the reasons why the cb175 has a higher redline. Compromise for more cooling fins?
 
Texasstar said:
Well if you wonder why MBA's have a zillion classes in statistical analysis this is why...you discover neat things like the answer to why???

My buddy Simo from New Zealand pointed out that the cb175 is 3mm shorter than the Cb200 piston. Now if you felt the end of a cb200 piston it is very top heavy. I would like to weigh the two and see what the difference is. However it could be one of the reasons why the cb175 has a higher redline.

Most deff one of the redline reasons. You should do the 175 piston swap and mill the head 3mm ;)
Lighter pistons, same compression rate so higher redline :)
 
Bert Jan said:
Most deff one of the redline reasons. You should do the 175 piston swap and mill the head 3mm ;)
Lighter pistons, same compression rate so higher redline :)
Bert the final impetus that started us down this journey was a radio program talking about tinkersbeing inventors and that this current generation has lost it's curiosity for tinkering. I made a right hand turn into the motorcycle bone yard and there she was. Lucky and fate wrapped up in a paradox.

One of the paradoxical lessons I want my son to see is exactly what you are proposing doing more with less.

Simo proposed the same thing..."

This might be helpfull, I wouldn't worry about the wrist pin size as you could bore the piston or ... Use a cb175 crank and cam in your 200 the strokes the same you get a wilder cam as stock you still need to shave 4-5 mm (can this be done?) off the head 3-3 1/2 if you dry fit the head and base gaskets .loose one link to the cam chain ,and use 175 studs to accept the loss in height ,everything else is stock 200 , you won't run into the primary gear / clutch basket issue that you would putting 200 cranks in 175 cases In my mind part of the cb200 rev limit is the fact the pistons TOP heavy
That's why even though the 175 and 200 both have 41mm stroke, the 200 top end is 5-8mm higher than the 175. Also you can't fit 175 barrels into 200 cases because jugs are to long out the base of the 175 cylinders even though they're a smaller bore . I was going to go down this track on my build ( at least in my mind) ... It may still happen if it blows up
Lighter pistons + bigger bore + wilder cam with minimal machining?=
$30 Us per piston + kit and $30 shipping"

This one looks interesting...would need to weld up the combustion chamber and do some Teazer magic to the squish etc...

Just taking in all the ideas right now and letting them simmer while we do some porting add the copper gasket and go back to the dyno wood shed to observe.
 

Attachments

  • image.jpg
    image.jpg
    222.4 KB · Views: 282
GPz550 pistons have 14mm pin dia and GPz650 pistons have 15mm pin dia. I don't have the compression height measurement for either piston but I have been lead to understand there is at least one CB175 around here running with GPz550 pistons - which makes them around 216cc if I punched my calculator buttons right.
I don't know how the 650 pistons would work in a 200...
I'd be thinking maybe sleeves from the Kaw were used on the 175 as well but don't know for certain.
Haven't checked them out re:pin and comp height, but maybe pistons from a GS550 (2 valve) are a candidate as well?
BTW, my 175 twin is a "manly" (LOL) 187cc after boring...
Great thread, really enjoy it.
Pat
 
pacomotorstuff said:
GPz550 pistons have 14mm pin dia and GPz650 pistons have 15mm pin dia. I don't have the compression height measurement for either piston but I have been lead to understand there is at least one CB175 around here running with GPz550 pistons - which makes them around 216cc if I punched my calculator buttons right.
I don't know how the 650 pistons would work in a 200...
I'd be thinking maybe sleeves from the Kaw were used on the 175 as well but don't know for certain.
Haven't checked them out re:pin and comp height, but maybe pistons from a GS550 (2 valve) are a candidate as well?
BTW, my 175 twin is a "manly" (LOL) 187cc after boring...
Great thread, really enjoy it.
Pat
thanks Pat!!!
 
I'd stick with the 15mm wrist pin if you can. It's likely stronger than the 14mm and this isn't one of those areas you really want to save weight. I suppose Honda's choice for the change from 14mm to 15mm has a lot to do with the increased size of their 200 pistons.

I've never had an opportunity to speak with any of the engineers that designed the 200 engine (I wish), but we can infer quite a bit based upon the final product. It's interesting to note that both the "upgrade" from the 175 to 200 engine and from the 350 to 360 engines, the ancestor produced more torque and less power; making for a smoother and more responsive ride with less need to wind the engine up to get some use from it. It's not that either of these engines are inferior to their predecessors (as many falsely believe), it's that their design goal was different. For those of us seeking to alter (dare I say, improve?) the characteristics of an engine, I think you'd be hard pressed to find more suitable candidates.
 
Before and after first pass... Should we raise it more? Is it true that if you create a step at the top of the exhaust chamber it benefits high rpm torque and HP?
 

Attachments

  • image.jpg
    image.jpg
    191 KB · Views: 280
  • image.jpg
    image.jpg
    187.6 KB · Views: 298
Sonreir said:
I'd stick with the 15mm wrist pin if you can. It's likely stronger than the 14mm and this isn't one of those areas you really want to save weight. I suppose Honda's choice for the change from 14mm to 15mm has a lot to do with the increased size of their 200 pistons.

I've never had an opportunity to speak with any of the engineers that designed the 200 engine (I wish), but we can infer quite a bit based upon the final product. It's interesting to note that both the "upgrade" from the 175 to 200 engine and from the 350 to 360 engines, the ancestor produced more torque and less power; making for a smoother and. more responsive ride with less need to wind the engine up to get some use from it. It's not that either of these engines are inferior to their predecessors (as many falsely believe), it's that their design goal was different. For those of us seeking to alter (dare I say, improve?) the characteristics of an engine, I think you'd be hard pressed to find more suitable candidates.
What we have been discovering is the genius of the engineers at honda. One of my best friends is on TQM team for the honda odyssey...they are OCD about why. We have two oddy's with a total of 350k between the two. We logged 200k in a 97 as a family and it still runs flawlessly...and you can put a cb200 in the back of it to go to Barber :)

I have had civics, accords, and a xr650. I just found on a Ferrari web site the best way to take care of the 308 cam cover leaking problem is with...honda bond :)

We sit in awe looking into the hourglass of time for our cb200. They were designing for a specific criteria...how to get 75mpg and make it feel like you were having fun. We are learning about Kaisen. We are learning it is ok to ask Why and to keep asking why until we die. :)

What we really want to do is keep same same same. Keep the bottom the same. Play with different bored out jugs. Play and tinker all the way until we send him off to college or a MOTOgp team as a mechanic ;) The Japanese got great grit because they had a bomb dropped on them. The question is how do you develop that grit into your children without dropping a bomb?
 
Back
Top Bottom