Redliner
Over 1,000 Posts
Texasstar said:Stage 2 Tuning
You can't just shove a 450 in there and....no wait. Wow, that's one stout lil beast.
Teazer, what's your thought on exhaust cut-out valves? In this case, the cable kind.
Texasstar said:Stage 2 Tuning
simo we put on the 20mm vm Mikuni's with the Polini velocity stacks. Big grin...simo said:Thats f..... Cool !!!!!!
Are you still running the 18mm venturi'd stock carbs in that vid? Or is that the miku?
How's the grin?
thanks Dave! My son says "lucky is twitchy and she jumps!"DaveTheYank said:OUTSTANDING! You've got to be happy about that. You've made some significant mods since your last outing, it would be hard to say which got you the most gain.
I would hope that after all the porting, polishing, valves, rockers, and carbs, that it wasn't just due to the shiny blue velocity stacks.
Bonneville, here you come!
i just read this to Zeke and he said, "Why don't we just get that megacycle cam dad?" We have an extra cam now to send off and next month the budget will allow for it.teazer said:What size are the float needle and seat? They can range from 1mm to 3.5mm in diameter on different carbs.
What air jets and main jets are in those and which needle jets and needles? Large air jets could contribute and it also may just be the main jets.
Looking at the graphs, neither torque not HP seem to be greatly changed when the A:F hit the stops. It's possible that the sniffer was too close to the end of the pipe and sucking air in.
That's a great looking toque curve but it tends to suggest that he cam is too mild and is working at lower revs than you now are looking for. You could adjust the cam to advance it a few degrees and see if that tilts the curve up, or get that Megacycle cam and let it breathe.
teazer said:Looking at the graphs, neither torque not HP seem to be greatly changed when the A:F hit the stops. It's possible that the sniffer was too close to the end of the pipe and sucking air in.