"Patina" The 1973 CB175 Cafe Racer

Re: "Patina" The 1973 CB175 Cafe Racer


Texasstar said:
we pulled our tappet covers just after first start.


Sent from my iPhone using Tapatalk

Yeah I was planning to do that. You got jokes, sir ;)
 
Re: "Patina" The 1973 CB175 Cafe Racer

I have transparent fuel line so I guess that's sufficient to tell.
 
Re: "Patina" The 1973 CB175 Cafe Racer

1sttimer said:
Couple questions about first start. Should I prime the cylinder somehow with a drop of gas or starter fluid or should a full tank with an open petcock be enough?

Personally. I put gas in the tank. (I'm a freak and all my high test gas gets a cap of two stroke in a five gallon can) looked for leaks. Hooked up the fuel lines and waited for the bowls to fill up, I opened the drain screws to flush carbs and to check fuel. Put it on choke... And vroooooom...
 
1sttimer said:
I should also mention that I am trying to build a ground up cafe racer...I'm doing a custom seat built by a guy in Burlington mounted to a fairly stock frame with some welded supports for rigidity. I'll be running velocity stacks from steel dragon eventually with a 2-1 built by a guy here locally and a DCC "shorty" muffler.

I'll have a 5-3/4" BATES light on the front, a cateye light on the back, DCC headlight ears, DCC headlight/kill switch all wired up with a Sonreir custom wiring harness (eventually).
You have come a long way amigo
 
Re: "Patina" The 1973 CB175 Cafe Racer


cafe mike said:
You have come a long way amigo

Ha!! It's amazing how things change over time. I bet Sonreir never thought I was going to buy a harness!!

I talked to him like 10 times through PM and I be the dreaded hearing from me because I hadn't bought anything yet! Haha but he hung in there and got my business. Great dude.

Thanks for pulling that up as a reminder man. Good stuff.
 
Re: "Patina" The 1973 CB175 Cafe Racer


cafe mike said:
Personally. I put gas in the tank. (I'm a freak and all my high test gas gets a cap of two stroke in a five gallon can) looked for leaks. Hooked up the fuel lines and waited for the bowls to fill up, I opened the drain screws to flush carbs and to check fuel. Put it on choke... And vroooooom...

Is that the big brass flathead looking thing? Just flush that through?
 
Re: "Patina" The 1973 CB175 Cafe Racer

1sttimer said:
Is that the big brass flathead looking thing? Just flush that through?

Yeah. Just make sure you put a rag under.
Not really flush. More making sure you have fuel
 
So, my story will begin here. I have gotten a lot done since this point so I'm going to use the next few days to backfill my work done and build up this build thread. I have learned a ton from this thread and appreciate all you guys do to help out. As I move forward I'll post more pictures, as I know we all love picture-heavy threads!!

Thanks guys and enjoy the ride!
[/quote]


This thread was promised lots of photos! I only see 25 pages of wiring problems!!!!
 
Re: "Patina" The 1973 CB175 Cafe Racer


cafe mike said:
So, my story will begin here. I have gotten a lot done since this point so I'm going to use the next few days to backfill my work done and build up this build thread. I have learned a ton from this thread and appreciate all you guys do to help out. As I move forward I'll post more pictures, as I know we all love picture-heavy threads!!

Thanks guys and enjoy the ride!



This thread was promised lots of photos! I only see 25 pages of wiring problems!!!!

Not enough pics?? Hopefully I get some video tonight ;)
 
Re: "Patina" The 1973 CB175 Cafe Racer

Before I go get gas and fill it up, this look right to you? Two main questions...

Will I get fuel if the line goes down then up? I assume so with hydrostatic pressure on the petcock assuming I get enough fuel.

I put my fuel filters on according to the arrow on it . I assume the arrow signifies the direction of flow?

Keep in mind I haven't snugged the fuel lines all the way yet.

3a8evadu.jpg


urehuna7.jpg
 
Yes fuel will flow down and then back up the bend and then down again into the carbs, no problem. It's the weight/pressure of all the gas in the tank that pushes it through the tube. Mine are even more of upward bend. (now, if someone else chimes in saying that it is a terrible idea and will cause problems, I wouldn't be too surprised...)
 
Re: "Patina" The 1973 CB175 Cafe Racer

You get .43 psi for every foot of elevation


Sent from my iPhone using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer


cafe mike said:
Yeah it's like 7psi per inch
lol in other words we have had enough foreplay


Sent from my iPhone using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer

Mike are you about to have premature ignition?


Sent from my iPhone using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer

Texasstar said:
lol in other words we have had enough foreplay


Sent from my iPhone using Tapatalk
Wow I'm way off. To get 3psi with water = 83"
And water is 1.00 specific gravity
Gas is .72
 
Re: "Patina" The 1973 CB175 Cafe Racer

Texasstar said:
Mike are you about to have premature ignition?


Sent from my iPhone using Tapatalk
You know it's possible. Do we need to have a long conversation about timing?
Did we time it???
 
Back
Top Bottom